重载敞车车体结构轻量化设计

姚曙光; 田红旗; 许平

doi:10.19818/j.cnki.1671-1637.2011.01.006

重载敞车车体结构轻量化设计

doi: 10.19818/j.cnki.1671-1637.2011.01.006

姚曙光^{1, 2,},
田红旗^{1, 2},
许平^{1, 2}

1.
中南大学交通运输工程学院，湖南长沙 410075
2.
中南大学轨道交通安全教育部重点实验室，湖南长沙 41007

基金项目:

铁道部科技研究开发计划项目 Z2007-079

铁道部科技研究开发计划项目 Z2008-031

详细信息

作者简介:
姚曙光（1970-），女，湖南邵阳人，中南大学副教授，工学博士，从事列车结构设计研究

中图分类号: U270.11
计量
- 文章访问数: 1931
- HTML全文浏览量: 448
- PDF下载量: 541
- 被引次数: 0
出版历程
- 收稿日期: 2010-11-13
- 刊出日期: 2011-02-25

Lightening design of carbody structure for heavy haul gondola

YAO Shu-guang^{1, 2
,},
TIAN Hong-qi^{1, 2},
XU Ping^{1, 2}

1.
School of Traffic and Transportation Engineering, Central South University, Changsha 410075, Hunan, China
2.
Key Laboratory for Track Traffic Safety of Ministry of Education, Central South University, Changsha 410075, Hunan, China

More Information

Author Bio:
YAO Shu-guang(1970-), female, associate professor, PhD, +86-731-82655294, ysgxzx@163.com

Article Text (Baidu Translation)

摘要

摘要: 以车体承载结构的质量为目标函数, 以部件板厚为设计变量, 以关键工况载荷下车体结构的应力与挠度为约束条件, 建立轴载40 t矿石敞车车体承载结构的优化设计数学模型。引入约束违反惩罚项构造新的无约束目标函数, 用共轭梯度法确定探索方向, 用最小二乘法逼近目标函数。在有限元分析软件ANSYS的二次开发平台上, 运用参数化设计语言APDL, 进行车体承载结构质量极小化的迭代计算。分析结果表明: 1/4车体承载结构的质量由1.939 5 t减小到1.760 7 t, 减轻约为9.22%, 车辆自重系数达到0.16, 减轻后车体结构强度和刚度仍满足相关规范与设计要求。
- 车辆工程 /
- 重载敞车 /
- 结构优化 /
- 惩罚函数 /
- 共轭梯度法
Abstract: The bearing structure mass of carbody was taken as objective function, the component thicknesses were taken as design variables, the structure stresses and deformations from key load cases were taken as constraint conditions, and an optimization mathematic model of carbody bearing structure for ore gondola with axle load 40 t was established. A new unconstrained objective function was set up via penalty function against constrain, the searching direction was decided according to conjugate gradient method, and the objective function was approximated by using least squares technique. Using parametric design language APDL, the iteration computation of mass minimization for carbody was performed based on the second development platform of FEA software ANSYS. Analysis result indicates that the 1/4 mass of carbody structure reduces from 1.939 5 t to 1.760 7 t, the relative mass loss rate is about 9.22%, the ratio of lighting mass to loading capacity is 0.16, and its strength and stiffness still meet the corresponding standard and design specification requirement.
- vehicle engineering /
- heavy haul gondola /
- structure optimization /
- penalty function /
- conjugate gradient method

HTML全文

图 1 1/4敞车车体结构有限元模型

Figure 1. Finite element model of 1/4 gondola carbody structure

下载: 全尺寸图片幻灯片

图 2 车体结构的质量迭代历程

Figure 2. Iteration courses of carbody structure mass

下载: 全尺寸图片幻灯片

表 1 状态变量的迭代历程

Table 1. Optimization courses of state variables

下载: 导出CSV

表 2 设计变量的优化结果

Table 2. Optimization values of design variables

下载: 导出CSV

参考文献(16)

[1]	钱立新. 国际重载机车车辆的最新进展[J]. 机车电传动, 2002 (1): 1-4, 17. doi: 10.3969/j.issn.1000-128X.2002.01.001 QI AN Li-xin. Latest development of international heavy freight rolling stocks[J]. Electric Drive for Locomotives, 2002 (1): 1-4, 17. (in Chinese) doi: 10.3969/j.issn.1000-128X.2002.01.001
[2]	郁志城, 余建军. 结构优化及其在铁道车辆设计中的应用[J]. 中国铁道科学, 1999, 20 (2): 79-85. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK199902009.htm YU Zhi-cheng, YU Jian-jun. Structure optimization and its application to railway cars design[J]. China Railway Science, 1999, 20 (2): 79-85. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK199902009.htm
[3]	乔务本, 孙丽萍, 区锐容, 等. 准高速客车车体的结构分析与优化研究[J]. 大连铁道学院学报, 1995, 16 (3): 41-48. http://www.cnki.com.cn/Article/CJFDTOTAL-DLTD503.008.htm QI AO Wu-ben, SUN Li-ping, OU Rui-rong, et al. Quasi high-speed passenger train's body structure analysis, optimum and investigation of further lighting weight design[J]. Journal of Dalian Railway Institute, 1995, 16 (3): 41-48. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-DLTD503.008.htm
[4]	赵洪伦, 俞程亮, 王文斌. 高速磁浮列车车体承载结构优化设计研究[J]. 铁道学报, 2007, 29 (4): 43-47. doi: 10.3321/j.issn:1001-8360.2007.04.009 ZHAO Hong-lun, YU Cheng-liang, WANG Wen-bin. Study on optimization design of carbody structure of high-speed maglev train[J]. Journal of the China Railway Society, 2007, 29 (4): 43-47. (in Chinese) doi: 10.3321/j.issn:1001-8360.2007.04.009
[5]	赵洪伦, 李玉家, 周劲松, 等. 铰接式高速客车车体承载结构优化研究[J]. 铁道学报, 1997, 19 (增): 22-28. http://www.cnki.com.cn/Article/CJFDTOTAL-TDXB7S1.003.htm ZHAO Hong-lun, LI Yu-jia, ZHOU Jing-song, et al. Optimization of body structure for the articulated high speed passenger car[J]. Journal of the China Railway Society, 1997, 19 (S): 22-28. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-TDXB7S1.003.htm
[6]	叶元烈, 秦东晨, 陈丽华. 薄壁覆盖件的结构优化设计[J]. 机械强度, 1999, 21 (3): 182-185. doi: 10.3321/j.issn:1001-9669.1999.03.006 YE Yuan-lie, QIN Dong-chen, Chen Li-hua. The structural optimization design of sheet cover[J]. Journal of Mechanical Strength, 1999, 21 (3): 182-185. (in Chinese) doi: 10.3321/j.issn:1001-9669.1999.03.006
[7]	GHOLIZADEHS, SALAJEGHEHE. Optimal seismic design of steel structures by anefficient soft computing basedalgorithm[J]. Journal of Constructional Steel Research, 2010, 66 (1): 85-95. doi: 10.1016/j.jcsr.2009.07.006
[8]	Specifications for design, fabrication and construction of freight cars-M-1001 standard[S].
[9]	PRONZATO L. Penalized optimal designs for dose-finding[J]. Journal of Statistical Planning and Inference, 2010, 140 (1): 283-296. doi: 10.1016/j.jspi.2009.07.012
[10]	HARTE A M. 复合轻轨车体的多级优化法[J]. 国外铁道车辆, 2005 (4): 18-22. doi: 10.3969/j.issn.1002-7610.2005.04.004 HARTE A M. A multi-level approach to the optimization of a composite light rail vehicle body-shell[J]. Foreign Rolling Stock, 2005 (4): 18-22. (in Chinese) doi: 10.3969/j.issn.1002-7610.2005.04.004
[11]	王勇, 蔡自兴, 曾威, 等. 求解约束优化问题的一种新的进化算法[J]. 中南大学学报: 自然科学版, 2006, 37 (1): 119-123. http://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD200601022.htm WANG Yong, CAI Zi-xing, ZENG Wei, et al. A new evolutionary algorithm for solving constrained optimization problems[J]. Journal of Central South University: Science and Technology, 2006, 37 (1): 119-123. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD200601022.htm
[12]	苏文力, 徐长生. 基于一阶优化方法的桥式起重机结构有限元分析[J]. 武汉理工大学学报: 交通科学与工程版, 2006, 30 (4): 619-622. http://www.cnki.com.cn/Article/CJFDTOTAL-JTKJ200604016.htm SU Wen-li, XU Chang-sheng. FEManalysis for the structure of bridge crane based onfirst order optimization method[J]. Journal of Wuhan University of Technology: Transportation Science and Engineering, 2006, 30 (4): 619-622. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JTKJ200604016.htm
[13]	林文泉, 朱尔玉, 孙玲. 一阶优化法在拱桥施工控制中的应用[J]. 北京交通大学学报, 2007, 31 (4): 89-91. http://www.cnki.com.cn/Article/CJFDTOTAL-BFJT200704023.htm LI N Wen-quan, ZHU Er-yu, SUN Ling. Application of the first-order optimization method in adjust ment of the force ofcable[J]. Journal of Beijing Jiaotong University, 2007, 31 (4): 89-91. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-BFJT200704023.htm
[14]	杨爱国, 张志强, 杨江天. 基于有限元建模的敞车轻量化设计[J]. 中国铁道科学, 2007, 28 (3): 79-83. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200703015.htm YANG Ai-guo, ZHANG Zhi-qiang, YANG Jiang-tian. Light weight design of open top wagon using updated finite element models[J]. China Railway Science, 2007, 28 (3): 79-83. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200703015.htm
[15]	桂树国. 基于ANSYS参数化设计语言APDL的产品结构优化设计[J]. 组合机床与自动化加工技术, 2010 (7): 91-96. http://www.cnki.com.cn/Article/CJFDTOTAL-ZHJC201007029.htm GUI Shu-guo. Optimal design of product structure based on ANSYS APDL[J]. Modular Machine Tool and Automatic Manufacturing Technique, 2010 (7): 91-96. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZHJC201007029.htm
[16]	王雷, 邢艳洪. 基于ANSYS的系列化零部件的参数化有限元建模[J]. 机械设计与制造, 2008 (6): 86-88. http://www.cnki.com.cn/Article/CJFDTOTAL-JSYZ200806037.htm WANG Lei, XI NG Yan-hong. Parameterized FEA modeling for serialized parts based on ANSYS[J]. Machinery Design and Manufacture, 2008 (6): 86-88. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JSYZ200806037.htm