Volume 10 Issue 6
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2010  >  10(6): 20-24
Next Previous
YANG Jun, LI Wei-nong, CHEN Zhi-wei, YU Bin. Finite element analysis of asphalt pavement on long-steep longitudinal slope[J]. Journal of Traffic and Transportation Engineering, 2010, 10(6): 20-24. doi: 10.19818/j.cnki.1671-1637.2010.06.004
Citation: YANG Jun, LI Wei-nong, CHEN Zhi-wei, YU Bin. Finite element analysis of asphalt pavement on long-steep longitudinal slope[J]. Journal of Traffic and Transportation Engineering, 2010, 10(6): 20-24. doi: 10.19818/j.cnki.1671-1637.2010.06.004
shu

Finite element analysis of asphalt pavement on long-steep longitudinal slope

doi: 10.19818/j.cnki.1671-1637.2010.06.004
  • 1.

    School of Transportation, Southeast University, Nanjing 210096, Jiangsu, China

  • 2.

    Zhejiang Provincial Kewe Engineering Consulting Co., Ltd., Hangzhou 310002, Zhejiang, China

  • 3.

    Department of Civil and Environmental Engineering, University of South Florida, Tampa 33620, Florida, USA

More Information
  • Author Bio:

    YANG Jun(1968-), female, professor, +86-25-83795840, yangjun@seu.edu.cn

  • Received Date: 2010-07-01
  • Publish Date: 2010-12-25
    Abstract
  • Because the rutting damages of asphalt pavement easily appeared at uphill sections of long-steep longitudinal slope, five different slopes were chosen based on the visco-elastic constitutive model of asphalt mixture, and the distribution regularities of the maximum shear stress and vertical strain for mixture surface course under the action of standard axle load were analyzed by finite element software ABAQUS. The impacts of traffic load and vehicle speed on road sections with and without slopes were also presented. Calculation result indicates that maximum shear stress and vertical strain are directly proportional to slope and traffic load and inversely proportional to speed. Road sections with slopes are more sensitive to traffic load and speed. The average values of the maximum shear stress and vertical strain in the middle layer, which ranges from 4~10 cm below road surface, are greater than that of other layers. So the rutting damages are most likely to appear in the middle layer, and it is more important to improve the rutting resistance of middle layer for long-steep longitudinal slope.

     

    • FullText(HTML)
  • loading
    • References(15)
  • [1]
    YANG Yang, GAO Li-bo. Analysis of three-di mensionalfinite element of shear stress of asphalt pavement structure inmountain area[J]. Northern Communications, 2007(3): 3-6. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-LNJT200703001.htm
    [2]
    LI Ming-guo, NI U Xiao-xia, SHEN Ai-qin. Anti-rut abilityof asphalt pavement on mountain freeway[J]. Journal ofChang an University: Natural Science Edition, 2006, 26(6): 19-22. (in Chinese) doi: 10.3321/j.issn:1671-8879.2006.06.005
    [3]
    CHEN Yong. Study on formation mechanism and controlmethods for rutting of asphalt pavement in long and steeplongitudinal slope sections[D]. Xi an: Chang an University, 2009. (in Chinese)
    [4]
    HAJJ E Y, SEBAALY P E, SIDDHARTHAN R V. Re-sponse of an asphalt pavement mixture under a slow movingtruck[J]. ASCE Journal of Transportation Engineering, 2006, 146(8): 134-146.
    [5]
    SHU Xiang, SUN Sheng-jie, LI Guo-wei. Analysis andharnessing methods for pavement disease of expressways inmountain area[J]. Highway, 2005(12): 183-186. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GLGL200512045.htm
    [6]
    YANG Hai-rong, GUAN Hong-xin. Asphalt pavements rut-ting on upgrade section under high temperature, heavy loadand slowspeed[J]. Journal of Changsha University of Scienceand Technology: Natural Science, 2008, 5(4): 13-17. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HNQG200804004.htm
    [7]
    ZHANG Yuan, ZOU Gui-lian. Investigation of stress statuson large longitudinal slope of asphalt pavement[J]. ScienceTechnology and Engineering, 2010, 10(22): 5580-5583. (in Chinese) doi: 10.3969/j.issn.1671-1815.2010.22.054
    [8]
    WU Shao-peng, WANG Jia-zhu, CHEN Tai-quan. Stress analysis of asphalt pavement on large longitudinal slope[J]. Journal of Wuhan University of Technology: Transportation Science and Engineering, 2006, 30(6): 969-972. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JTKJ200606011.htm
    [9]
    WU Hao, PEI Jian-zhong, ZHANG Jiu-peng. Rutting lawand its influence factors for asphalt pavement in long andsteep longitudinal slope section[J]. Journal of Chang anUniversity: Natural Science Edition, 2009, 29(6): 28-31. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200906008.htm
    [10]
    YANGJun, ZHU Hao-ran, CUI Juan. Deformation proper-ties of asphalt mixtures for steel bridge deckthrough repeatedload triaxial test[J]. Journal of Traffic and Transportation Engineering, 2008, 8(6): 24-28. (in Chinese) http://transport.gfscw.cn/article/id/200806005
    [11]
    ZHANGJiu-peng, HUANG Xiao-ming, GAO Ying. Nonlinearcreep model of asphalt mixture and parameter determination[J]. Journal of Chang an University: Natural Science Edition, 2009, 29(2): 24-27. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200902009.htm
    [12]
    DU Shun-cheng, DAI Jing-liang. Permanent deformation evaluation index of asphalt mixture[J]. China Journal ofHighway and Transport, 2006, 19(5): 18-22. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200605004.htm
    [13]
    SU Kai, WUJian-min, CHENZhong-da, et al. Research oncutting-slippage between surface and base about mountainasphalt pavement[J]. China Journal of Highway andTransport, 2005, 18(3): 22-26. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200503006.htm
    [14]
    ZHENG Mu-lian, MA Qing-lei, CHEN Shuan-fa, et al. Loadstress analysis of concrete base for durable asphalt pavement with3Dfinite element model[J]. Journal of Traffic and Transpor-tation Engineering, 2008, 8(4): 47-51. (in Chinese) http://transport.gfscw.cn/article/id/200804010
    [15]
    YANG Jun, CONG Ling, ZHU Hao-ran, et al. Analysis ofrutting potential of asphalt pavement on the steel deck byfinite element method[J]. Engineering Mechanics, 2009, 26(5): 110-115. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCLX200905020.htm
    • Relative Articles
    • Supplements(0)
    • Cited By

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (1979) PDF downloads(845) Cited by()
    Related

    Website copyright Journal of Traffic and Transportation Engineering Editorial Department陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang'an University, Middle Section of South 2nd Ring Road, Xi'an, China（710064） Tel：029-82334388 Email：jygc@gfscw.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return