JIANG Kai, SU Qian, FENG Xu. Mechanical property of early-strength water-containing unsaturated polyurethane concrete[J]. Journal of Traffic and Transportation Engineering, 2016, 16(2): 10-17. doi: 10.19818/j.cnki.1671-1637.2016.02.002
Citation: JIANG Kai, SU Qian, FENG Xu. Mechanical property of early-strength water-containing unsaturated polyurethane concrete[J]. Journal of Traffic and Transportation Engineering, 2016, 16(2): 10-17. doi: 10.19818/j.cnki.1671-1637.2016.02.002

Mechanical property of early-strength water-containing unsaturated polyurethane concrete

doi: 10.19818/j.cnki.1671-1637.2016.02.002
More Information
  • Author Bio:

    JIANG Kai(1983-), male, doctoral student, +86-28-87600996, jiangkai1006@sina.com

    SU Qian(1972-), male, professor, PhD, +86-28-87600996, suqian@126.com

  • Received Date: 2015-10-25
  • Publish Date: 2016-04-25
  • To solve the problem of poor workability, fast curing and molding difficulty of common polyurethane concrete, a new water-containing unsaturated polyurethane concrete was proposed according to the requirement of high standards for aggregate in common polymer concrete.The mechanical properties of water-containing unsaturated polyurethane concrete were investigated by ratio test, strength test, water-mixed test, immersion test and field sampling test, and the effects of material properties, material ratio, temperature and moisture content on the mechanical properties were analyzed.Analysis result shows when the added amount of water is 15%-20% of unsaturated polyurethane at 10 ℃-20 ℃, the added amount of water is 20%-30% of unsaturated polyurethane above 20 ℃, the compressive strength of 1d for the water-containing unsaturated polyurethane concrete is 22.70 MPa in field engineering application and immersion test, and the phenomena of softening and disintegration are not found after long-term immersion.Obviously, the water-containing unsaturated polyurethane concrete has good stability, workability and formability that meet the engineering needs in the construction.At 15 ℃, the recommended massratio of cement, sand, stone, ZK3, water, unsaturated polyurethane, initiator, and accelerant is1.000∶5.700∶7.300∶1.300∶0.080∶2.000∶0.050∶0.025.

     

  • loading
  • [1]
    WEI Zhuo-bin, WANG Tie-cheng, GAO Yi. Experiment on a type of polyurethane concrete possessing early strength and speedily solidification[J]. Concrete, 2005(9): 58-64. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HLTF200509014.htm
    [2]
    MARZOCCHI A, ROBERTN G, BOLEN G E. Road pavement and repair: USA, US 4265563[P]. 1981-05-05.
    [3]
    CHATTOPADHYAY D K, RAJU K V S N. Structural engineering of polyurethane coatings for high performance applications[J]. Progress in Polymer Science, 2007, 32(3): 352-418.
    [4]
    OHAMA Y. Recent progress in concrete-polymer composites[J]. Advanced Cement Based Materials, 1997, 5(2): 31-40. doi: 10.1016/S1065-7355(96)00005-3
    [5]
    SARVA S S, DESCHANEL S, BOYCE M C, et al. Stressstrain behavior of a polyurea and a polyurethane from low to high strain rates[J]. Polymer, 2007, 48(8): 2208-2213. doi: 10.1016/j.polymer.2007.02.058
    [6]
    PENG Quan-min. Experiment research on rapid pavement repair of airfield runway by employing polyurethane materials[D]. Tianjin: Tianjin University, 2005. (in Chinese)
    [7]
    GAO Yi, WEI Zhuo-bin, WANG Tie-cheng. Experimental study on the polyurethane materials used for rapid repair of airfield pavement[J]. Journal of Naval University of Engineering, 2007, 19(3): 104-107. (in Chinese) doi: 10.3969/j.issn.1009-3486.2007.03.024
    [8]
    LIANG Nai-xing, CAO Yuan-wen, YAO Hong-yun. Research on performance of cement concrete modified with styrene butadiene latex[J]. Journal of Highway and Transportation Research and Development, 2005, 22(3): 21-23. (in Chinese) doi: 10.3969/j.issn.1002-0268.2005.03.006
    [9]
    SHEN Ai-qin. Study on the crack mending materials of cement concrete pavement[D]. Xi'an: Chang'an University, 2005. (in Chinese)
    [10]
    LUO Li-feng. Construction technology of SFRPC bridge deck pavement[D]. Guangzhou: South China University of Technology, 2002. (in Chinese)
    [11]
    PATEL P S D, SHEPHERD D E T, HUKINS D W L. Compressive properties of commercially available polyurethane foams as mechanical models for osteoporotic human cancellous[J]. BMC Musculoskeletal Disorders, 2008, 9(1): 137-141. doi: 10.1186/1471-2474-9-137
    [12]
    MOLINDA G. Reinforcing coal mine roof with polyurethane injection: 4 case studies[J]. Geotechnical and Geological Engineering, 2008, 26(5): 553-566. doi: 10.1007/s10706-008-9189-0
    [13]
    LEE S H, WANG S, PHARR G M, et al. Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis[J]. Composites Part A: Applied Science and Manufacturing, 2007, 38(6): 1517-1524. doi: 10.1016/j.compositesa.2007.01.007
    [14]
    HOUSHYAR S, SHANK R A, HODZIC A. The effect of fiber concentration on mechanical and thermal properties of fiber-reinforced polypropylene composites[J]. Journal of Applied Polymer Science, 2005, 96(6): 2260-2272. doi: 10.1002/app.20874
    [15]
    DAVIDOVITS J. Geopolymers: inorganic polymeric new materials[J]. Journal of Thermal Analysis, 1991, 37(8): 1633-1656. doi: 10.1007/BF01912193
    [16]
    DAVIDOVITS J. Recent progresses in concretes for nuclear waste and uranium waste containment[J]. Concrete Intimation, 1994, 16(12): 53-58.
    [17]
    ZHANG Lin. Study and develop on rapid repair materials of cement concrete pavements[D]. Xi'an: Chang'an University, 2011. (in Chinese)
    [18]
    STRAND D, MACDONALD C N, RAMAKRISHNAN V, et al. Construction applications of Polyolefin fiber reinforced concrete[C]//ASCE. Proceedings of ASCE 4th Materials Engineering Conference. Reston: ASCE, 1996: 103-112.
    [19]
    PENG Xiao-qin, YANG Tao, WANG Kai-yu, et al. Preparation of geopolymeric concrete and its application to rapid repair of cement concrete pavement[J]. Journal of Southwest Jiaotong University, 2011, 46(2): 205-210. (in Chinese) doi: 10.3969/j.issn.0258-2724.2011.02.005
    [20]
    YANG Ruo-chong, TAN Zhi-ming, HUANG Xiao-ming, et al. Research on performance of rubberized concrete incorporated with polymer[J]. China Journal of Highway and Transport, 2010, 23(4): 15-19. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201004004.htm
    [21]
    FOWLER D W. Polyenes in concrete: a version for the 21st century[J]. Cement and Concert Composites, 1999, 21(5/6): 449-452.
    [22]
    DOWNING T D, KUMAR R, CROSS W M, et al. Determining the interphase thickness and properties in polymer matrix composites using phase imaging atomic force microscopy and nanoindentation[J]. Journal of Adhesion Science and Technology, 2000, 14(14): 1801-1812.
    [23]
    JANOTKA I, KRAJCI L, RAY A, et al. The hydration phase and pore structure formation in the blends of sulfoaluminate-belite cement with Portland cement[J]. Cement and Concrete Research, 2003, 33(4): 489-497.
    [24]
    AL-NEGHEIMISH A I, ALHOZAIMY A M. Impact of extremely hot weather and mixing method on changes in properties of ready mixed concrete during delivery[J]. ACI Materials Journal, 2008, 105(5): 438-444.
    [25]
    GAO Yi, WEI Zhuo-bin. Experimental study on frothing techniques with mixed polyurethane materials[J]. Engineering Mechanics, 2009, 26(S1): 198-202. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCLX2009S1047.htm

Catalog

    Article Metrics

    Article views (1752) PDF downloads(736) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return