Four-working-platform pouring method for main arch ring concrete of rigid skeleton arch bridge

LIN Chun-jiao; ZHENG Jie-lian

doi:10.19818/j.cnki.1671-1637.2020.06.007

Volume 20 Issue 6

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2020 > 20(6): 82-89

Next Previous

LIN Chun-jiao, ZHENG Jie-lian. Four-working-platform pouring method for main arch ring concrete of rigid skeleton arch bridge[J]. Journal of Traffic and Transportation Engineering, 2020, 20(6): 82-89. doi: 10.19818/j.cnki.1671-1637.2020.06.007

Citation:

LIN Chun-jiao, ZHENG Jie-lian. Four-working-platform pouring method for main arch ring concrete of rigid skeleton arch bridge[J]. Journal of Traffic and Transportation Engineering, 2020, 20(6): 82-89. doi: 10.19818/j.cnki.1671-1637.2020.06.007

Citation:

PDF( 735 KB)

Four-working-platform pouring method for main arch ring concrete of rigid skeleton arch bridge

doi: 10.19818/j.cnki.1671-1637.2020.06.007

LIN Chun-jiao^{1, 2
,},
ZHENG Jie-lian^{1, 2
,
,}

1.
School of Civil Engineering and Architecture, Guangxi University, Nanning 530004, Guangxi, China
2.
Key Laboratory of Disaster Prevention and Structural Safety of Ministry of Education, Guangxi University, Nanning 530004, Guangxi, China

Funds:

National Natural Science Foundation of China 51878186

Science and Technology Program of Sichuan Province 2018GZ0052

More Information

Author Bio:
LIN Chun-jiao(1971-), female, associate professor, PhD, llccwj@163.com

ZHENG Jie-lian(1941-), male, professor, academician of Chinese Academy of Engineering, zhengjielian@163.com
Received Date: 2020-06-16
Publish Date: 2020-12-25

Abstract

Abstract

To investigate a method of setting working platforms during the concrete pouring for the main arch ring of a rigid skeleton under a reasonable stress and with a convenient and economical construction and taking the Nanpanjiang Super Long Span Bridge as an object, the transient stress variation process of rigid skeleton caused by the first ring concrete symmetrically poured from the two arch springs was analyzed. The stress process curves of the main control section of rigid skeleton were obtained. A concrete pouring method for the main arch ring was proposed with four working platforms arranged symmetrically along the longitudinal arch, and the working platforms were set at the arch spring section and the peak of control stress process curve, such that the stress increments on the rigid skeleton generated by the cocrete of two working platforms within the half span had different signs to offest part of the stress. By fitting the continuous functions of the ascending and descending sections of absolute control stress process curve, the pouring length and sequence of concrete was reasonably adjusted to reduce the transient stress and deformation of rigid skeleton. The construction operability and economy of the four-working-platform method were discussed, and the stress and deformation of rigid skeleton during the concrete pouring process for the first ring of main arch ring of Nanpanjiang Super Long Span Bridge were analyzed. Research result shows that the stress process curve of concrete filled in the arch spring tube represents a control stress and single wave curve. The proposed four-working-platform method with the order of first along the span, then in arch spring and with the length calculated by the fitting function is reasonable for the concrete pouring of Nanpanjiang Super Long Span Bridge. The maximum transient tensile and compressive stresses of rigid skeleton reduce to 0.4 and 23.5 MPa, respectively, which are well controlled within the range of material strength. The vault has no upward deflection, the maximum transient deflection and eternal ring deflection are 192 and 82 mm, respectively, and the arch axis does not deform repeatedly. The four-working-platform pouring method requires less equipment and personnel, is economical, and has good operability. It is suitable for the concrete pouring for the main arch ring of rigid skeleton arch bridges, and can be used for similar bridges.
- bridge engineering,
- four-working-platform pouring method,
- finite element,
- rigid skeleton concrete arch bridge,
- arch ring concrete,
- transient stress

FullText(HTML)

References(30)

References

[1]	ZHENG Jie-lian. New development tendency of large-span reinforced concrete arch bridge in China[J]. Journal of Chongqing Jiaotong University (Natural Science), 2016, 35(S1): 8-11. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-CQJT2016S1002.htm
[2]	CHEN Bao-chun, LIU Jun-ping. Review of construction and technology development of arch bridges in the world[J]. Journal of Traffic and Transportation Engineering, 2020, 20(1): 27-41. (in Chinese). doi: 10.19818/j.cnki.1671-1637.2020.01.002
[3]	ZHENG Jie-lian, WANG Jian-jun. Concrete-filled steel tube arch bridges in China[J]. Engineering, 2018, 4(1): 143-155. doi: 10.1016/j.eng.2017.12.003
[4]	ZHENG Jie-lian, WANG Jian-jun, MOU Ting-min, et al. Feasibility study on design and construction of concrete filled steel tubular arch bridge with a span of 700 m[J]. Strategic Study of CAE, 2014, 16(8): 33-37. (in Chinese). doi: 10.3969/j.issn.1009-1742.2014.08.004
[5]	ZHAO Ren-da, ZHANG Zheng-yang. A summary of development of concrete-filled steel tube framed arch bridges in China[J]. Bridge Construction, 2016, 46(6): 45-50. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-QLJS201606010.htm
[6]	YOU Yun-chuan, GUO Lun-bo. The research on design of the stiff skeleton of long-span arch bridge[J]. Transportation Science and Technology, 2019(2): 5-8, 12. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-SKQB201902002.htm
[7]	CHEN Bao-chun, WANG T L. Overview of concrete filled steel tube arch bridges in China[J]. Practice Periodical on Structural Design and Construction, 2009, 14(2): 70-80. doi: 10.1061/(ASCE)1084-0680(2009)14:2(70)
[8]	HU Nan, DAI Gong-lian, YAN Bin, et al. Recent development of design and construction of medium and long span high-speed railway bridges in China[J]. Engineering Structures, 2014, 74: 233-241. doi: 10.1016/j.engstruct.2014.05.052
[9]	WEI Jian-gang, CHEN Bao-chun. Application and research advancement of long span concrete arch bridges abroad[J]. World Bridges, 2009(2): 4-8. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-GWQL200902002.htm
[10]	KANG Chong-jie, SCHNEIDER S, WENNER M, et al. Development of design and construction of high-speed railway bridges in Germany[J]. Engineering Structures, 2018, 163: 184-196. doi: 10.1016/j.engstruct.2018.02.059
[11]	JOHN J S. Construction of the Hoover Dam Bypass[J]. Concrete International, 2011, 33(2): 30-35.
[12]	GOODYEAR D. Design of the New Mike O'callaghan Pat Tillman Memorial Bridge at Hoover Dam[C]∥AMES D, DROESSLER T L, HOIT M. Structures Congress 2011. Reston: ASCE, 2011: 1806-1815.
[13]	KEATON J R. Earthquake ground motion for design of Hoover Dam Bypass Bridge (US Highway 93)[C]∥YEGIAN M K, KAVAZANJIAN E. Proceedings of Geotechnical Engineering for Transportation Projects. Reston: ASCE, 2004: 1721-1728.
[14]	GRANATA M F, MARGIOTTA P, RECUPERO A, et al. Partial elastic scheme method in cantilever construction of concrete arch bridges[J]. Journal of Bridge Engineering, 2013, 18(7): 663-672. doi: 10.1061/(ASCE)BE.1943-5592.0000396
[15]	GAO Yu-feng, PU Qian-hui, LI Xiao-bin, et al. Application and development of cantilever casting method for construction of long span concrete arch bridges abroad[J]. World Bridges, 2008(1): 18-21. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-GWQL200801005.htm
[16]	CANDRLIC V, RADIC J, GUKOV I. Research of concrete arch bridges up to 1 000 m in span[C]//ROCA P, OÑATE E. Proceedings of the 4th International Conference on Arch Bridge. Barcelona: CMNE, 2004: 538-547.
[17]	HU Da-lin, CHEN Ding-shi, ZHAO Xiao-you, et al. Construction control of cantilever casting of long span reinforced concrete arch bridge[J]. Journal of Traffic and Transportation Engineering, 2016, 16(1): 25-36. (in Chinese). doi: 10.3969/j.issn.1671-1637.2016.01.004
[18]	TROYANO L F. Procedures for the construction of large concrete arches[C]//ROCA P, OÑATE E. Proceedings of the 4th International Conference on Arch Bridge. Barcelona: CMNE, 2004: 54-64.
[19]	LIU Zhong-ren, CHENG Mao-fang. Construction of 180 m-span flat-turn reinforced concrete arch bridge with balancing weight[J]. Urban Roads Bridges and Flood Control, 2019(1): 115-117. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-CSDQ201901039.htm
[20]	FENG Cong. Discussion on Yun-Gui Railway Nanpanjiang Grand CFST Arch Bridge construction technology[J]. Railway Construction Technology, 2012(8): 77-80. (in Chinese). doi: 10.3969/j.issn.1009-4539.2012.08.021
[21]	ZHENG Yi-xin, ZHANG Hong-kun. Study on construction control of the stiff skeleton of Beipanjiang Long Span Bridge on Shanghai-Kunming High-Speed Railway[J]. Journal of Railway Science and Engineering, 2015, 12(3): 496-501. (in Chinese). doi: 10.3969/j.issn.1672-7029.2015.03.007
[22]	SHI Yong-liang. Stability research on horizontal rotation construction of long-span box-arch bridge with concrete-filled steel tube stiff skeleton[J]. Railway Engineering, 2020, 60(7): 34-37. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-TDJZ202007008.htm
[23]	WANG Xiao-fei. Analysis on pouring scheme of surrounding concrete for railway large span arch bridge with stiff skeleton[J]. Railway Engineering, 2020, 60(5): 11-14, 29. (in Chinese). doi: 10.3969/j.issn.1003-1995.2020.05.03
[24]	REN Wei-dong. Research on the key construction technology of the Lancang River Super Major Bridge of Dali-Ruili Railway[J]. Railway Standard Design, 2021, DOI: 10.13238/j.issn.1004-2954.202007040006.(in Chinese).
[25]	YU Chang-bin. Construction technology on concrete cable-stayed and buckle-hanging combined with the ring-section of large-span arch bridge's arch ring[J]. Railway Construction Technology, 2016(6): 1-4. (in Chinese). doi: 10.3969/j.issn.1009-4539.2016.06.001
[26]	ZHENG Jie-lian. Discussion on placing concrete uninterruptedly on closure arch rigid skeleton[J]. Journal of Chongqing Jiaotong University (Natural Science), 2011, 30(S2): 1099-1105, 1158. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-CQJT2011S2005.htm
[27]	LIN Chun-jiao, ZHENG Jie-lian. Analysis of construction of main arch rib concrete of Nanpan River Bridge using fastening stay method[J]. Bridge Construction, 2016, 46(5): 116-121. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-QLJS201605023.htm
[28]	LIN Chun-jiao, ZHENG Jie-lian, LI Xiang, et al. Structural stress adjustment of arch rib of Nanpan River Long-Span Bridge with diagonal stay cables[J]. Journal of Guangxi University (Natural Science Edition), 2017, 42(1): 274-283. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-GXKZ201701035.htm
[29]	ZHANG Fu-gui, ZHANG Yong-shui, DONG Yi, et al. Outscourcing concrete pouring scheme of long-span stiff skeleton arch bridge[J]. Journal of Chongqing Jiaotong University (Natural Science), 2012, 31(2): 210-213, 238. (in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-CQJT201202011.htm
[30]	WU Hai-jun, WANG Miao-min, LIU Ping. Influence of pouring cycle schemes of externally wrapped concrete of concrete arch bridge with stiff skeleton on structure mechanics[J]. Journal of Chongqing Jiaotong University (Natural Science), 2017, 36(11): 1-6. (in Chinese). doi: 10.3969/j.issn.1674-0696.2017.11.01

Relative Articles

Supplements(0)

Cited By

Get Citation

PDF

XML

Article Metrics

Article views (2001) PDF downloads(223)

Four-working-platform pouring method for main arch ring concrete of rigid skeleton arch bridge

doi: 10.19818/j.cnki.1671-1637.2020.06.007

Abstract

References

Catalog

Article Metrics

Related

Four-working-platform pouring method for main arch ring concrete of rigid skeleton arch bridge

doi: 10.19818/j.cnki.1671-1637.2020.06.007

Abstract

References

Catalog

Article Metrics

Related

Export File

Citation

Format

Content