Volume 22 Issue 5
Oct.  2022
Turn off MathJax
Article Contents
CHEN Bao-chun, HUANG Fu-yun, XUE Jun-qing, LUO Xiao-ye, ZHUANG Yi-zhou, LIU Yong-jian, XU Ming, ZHAO Qiu-hong, BRISEGHELLA Bruno. Review on research of jointless bridges[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 1-40. doi: 10.19818/j.cnki.1671-1637.2022.05.001
Citation: CHEN Bao-chun, HUANG Fu-yun, XUE Jun-qing, LUO Xiao-ye, ZHUANG Yi-zhou, LIU Yong-jian, XU Ming, ZHAO Qiu-hong, BRISEGHELLA Bruno. Review on research of jointless bridges[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 1-40. doi: 10.19818/j.cnki.1671-1637.2022.05.001

Review on research of jointless bridges

doi: 10.19818/j.cnki.1671-1637.2022.05.001
Funds:

National Natural Science Foundation of China 51578161

National Natural Science Foundation of China 51508103

National Natural Science Foundation of China 51778147

National Natural Science Foundation of China 51778148

More Information
  • Author Bio:

    CHEN Baochun (1958–), male, from Luoyuan, Fujian; professor of Fujian University of Technology and Fuzhou University, PhD in Engineering. Research interest: jointless bridges, arch bridges, and UHPC bridges. E-mail: baochunchen@fzu.edu.cn

  • Received Date: 2022-05-19
  • Publish Date: 2022-10-25
  • The technological development of jointless bridges was reviewed, the advatages, application and research hotspots were introduced, the longitudinal stress characteristics, pile-soil interaction, earth pressure of backfill on the autment and seismic performance were analyzed, and the present situation and development direction of the new technology research and application were pointed out. Analysis results show that the technologies of jointless bridges have been attached to importance in many countries, and a large number of field monitoring projects and other researches have been carried out. The temperature-induced deformation is the main cause of longitudinal stress of jointless bridge, and the average temperature difference predicted by the codes is quite different from the data obtained from field monitoring. Therefore, a preciser calculation method should be developed. Pile-soil interaction is the dominant characteristic of integral bridge and is the emphasis and difficulty of the research. In calculating the soil resistance, the m method should be limited to jointless bridges with small movements, while the p-y curve method should be employed when the movements are larger. The piles of the integral abutments are stressed complexly, H-shaped steel piles may be subjected to yielding, fatigue, and buckling, while RC piles are prone to be damaged by cracking. The high earth pressure behind the abutment induced by temperature rise is a hot spot and difficulty in the research. The mechanism, magnitude, and distribution of the earth pressure increasing with the horizontal movement and reciprocating number have not reached a consensus, and need to be further studied systematically. In analyzing the longitudinal behaviour of jointless bridge, the finite element model should involve the whole structure of the bridge, and considering the soil-structure interaction and the nonlinear performance of the joint. The stability of steel girders under compression and the crack-resistance of concrete girders under tension are the key points in research and design. The approach slab is an important and damage-prone component of jointless bridges. For the grade flat approach slabs, the frictional resistance at the bottom should be reduced, and the cracking and end settlement should be avoided. While for the buried inclined approach slabs, the swell and settlement of approach pavement above their ends should be controlled. Many new technologies for jointless bridges have been proposed, applied, and should be further studied, including the application of new materials and new details in various components, abutments, pile foundations, and approach slabs of jointless bridges. Jointless bridges have higher structural robustness and capability to prevent collapse and unseating of the superstructures. The research on the seismic resistance of jointless bridges has made gratified progress, but the relevant design regulations have not been formed in many countries. It is necessary to conduct comprehensive research to provide a scientific basis for engineering application and the formulation of the specifications in the future.

     

  • loading
  • [1]
    MARTIN P B. Integral & Semi-Integral Bridges[M]. Singapore: Wiley-Blackwell, 2009.
    [2]
    CHEN Bao-chun, ZHUANG Yi-zhou, HUANG Fu-yun. Jointless Bridges[M]. 2nd Edition. Beijing: China Communication Press, 2019. (in Chinese)
    [3]
    AZIZINAMINI A, POWER E H, MYERS G F, et al. Design guide for bridges for service life[R]. Washington DC: The National Academies Press, 2013.
    [4]
    PÉTURSSON H, COLLIN P. Innovative solutions for integral abutments[C]//COLLIN P, VELJKOVIC M, PÉTURSSON H. 2006 International Workshop on the Bridges with Integral Abutments. Luleå: Luleå Tekniska Universitet, 2006: 65-76.
    [5]
    SHI Cheng-cheng, WANG Yuan-feng, CHEN Bao-chun, et al. Life-cycle environmental and economic benefits of jointless bridges considering climate change[J]. Structure and Infrastructure Engineering, 2021, DOI: 10.1080/15732479.2021.1979598.
    [6]
    MARURI R F, PETRO S H. Integral abutments and jointless bridges (IAJB) 2004 survey summary[C]//FHWA. 2005 FHWA Conference on Integral Abutment and Jointless Bridges. Baltimore: West Virginia University, 2005: 12-29.
    [7]
    PARASCHOS A, AMDE A M. A survey on the status of use, problems, and costs associated with integral abutment bridges[J]. Better Roads, 2011: 54032327.
    [8]
    KEROKOSKI O, LAAKSONEN A. Soil-structure interaction of jointless bridges[C]//FHWA. 2005 FHWA Conference on Integral Abutment and Jointless Bridges. Baltimore: West Virginia University, 2005: 323-336.
    [9]
    FRANCO J M. Design and field testing of jointless bridges[D]. Morgantown: West Virginia University, 1999.
    [10]
    WOOD J, MURASHEV A, PALERMO A, et al. Criteria and guidance for the design of integral bridges in New Zealand[M]. New Zealand: NZ Transport Agency, 2015.
    [11]
    ILES D, ASCOT U K. Integral bridges in the UK[C]// COLLIN P, VELJKOVIC M, PÉTURSSON H. 2006 International Workshop on the Bridges with Integral Abutments. Luleå: Luleå University of Technology, 2006: 13-24.
    [12]
    PÖTZL M. Less is more-design principles for joint-less bridges[C]//CHEN Bao-chun. The 1st International Symposium on Jointless Bridges. Fuzhou: Fuzhou University, 2014: 20-32.
    [13]
    GEIER R. Recent austrian experiences in design, construction and monitoring of integral bridges[C]//CHEN Bao-chun. The 1st International Symposium on Jointless and Sustainable Bridges. Fuzhou: Fuzhou University, 2016: 127-146.
    [14]
    RUSSO G, BERGAMO O, DAMIANI L. Retrofitting a short span bridge with a semi-integral abutment bridge: the Treviso Bridge[J]. Structural Engineering International, 2009, 19(2): 137-141. doi: 10.2749/101686609788220051
    [15]
    XUE Jun-qing, BRISEGHELLA B, CHEN Bao-chun, et al. Italian national road authority IABs sstrategy[C]//IABMA. The 7th International Conference on Bridge Maintenance, Safety and Management. Shanghai: Tongji University, 2014: 1854-1862.
    [16]
    ENGLAND G L, TSANG N C M, BUSH D I. Integral bridges: a Fundamental Approach to the Time-Temperature Loading Problem[M]. London: Thomas Telford, 2000.
    [17]
    GEIER R, ANGELMAIER V, GRAUBNER C A, et al. Integrale Brücken: Entwurf, Berechnung, Ausführung, Monitoring[M]. Berlin: John Wiley & Sons, 2017.
    [18]
    ISHIKAWA Y, AOYAMA M, KUROYANAGI M, et al. Proposition of a new type of jointless system for existing concrete bridges[J]. Journal of Physical Science and Application, 2014, 4(2): 84-89.
    [19]
    CHOI K S, LEE T H, JEON G W, et al. The present and future of jointless bridges for expressway[J]. The Magazine of the Korean Society of Civil Engineers, 2018, 66(10): 51-56.
    [20]
    CHEN Bao-chun, FU Cui, ZHUANG Yi-zhou, et al. Application status and development strategies of jointless bridgs in China[J]. Journal of China and Foreign Highway, 2018, 38(1): 87-95. (in Chinese) doi: 10.14048/j.issn.1671-2579.2018.01.020
    [21]
    CHEN Bao-chun, WANG Chen-hui, XUE Jun-qing, et al. Investigation and analysis on the application of jointless bridges in China[J]. Journal of Architecture and Civil Engineering, 2022, 39(5): 13-21. (in Chinese)
    [22]
    XU Zhen, CHEN Bao-chun, ZHUANG Yi-zhou, et al. Rehabilitation and retrofitting of a multispan simply-supported adjacent box girder bridge into a jointless and continuous structure[J]. Journal of Performance of Constructed Facilities, 2018, 32(1): 04017112. doi: 10.1061/(ASCE)CF.1943-5509.0001107
    [23]
    XU Zhen, CHEN Bao-chun, HUANG Fu-yun, et al. Nonlinear stiffness of semi-fixed dowel joints in semi-integral bridges[J]. Applied Sciences, 2022, 12(4): 2138. doi: 10.3390/app12042138
    [24]
    DONG Ju-can, CHEN Bao-chun, BRISEGHELLA B, et al. Integral transformation design of multi-span hollow slab simply-supported bridge[J]. Journal of Architecture and Civil Engineering, 2015, 32(5): 73-80. (in Chinese) doi: 10.3969/j.issn.1673-2049.2015.05.010
    [25]
    XU Zhen, CHEN Bao-chun, HUANG Fu-yun, et al. Mechanical performance of jointless retrofitted bridge with hollow-slabs[J]. Journal of Traffic and Transportation Engineering, 2018, 18(5): 66-76. (in Chinese) doi: 10.3969/j.issn.1671-1637.2018.05.007
    [26]
    DONG Ju-can, XU Zhen, BRISEGHELLA B, et al. Jointless reconstruction and design of jointless transformation of a multi-span simply supported hollow slab bridge[J]. Journal of China and Foreign Highway, 2015, 35(4): 170-174. (in Chinese) doi: 10.14048/j.issn.1671-2579.2015.04.039
    [27]
    LIN Shang-shun, LIN Wen, OU Zhi-jing, et al. Jointless reconstruction technology of old highway bridges[J]. Journal of Fujian University of Technology, 2017, 15(3): 205-209. (in Chinese) doi: 10.3969/j.issn.1672-4348.2017.03.001
    [28]
    YEN W P, KUO L M. Integral abutment and jointless bridges design issues and recommendations[C]//CHEN Bao-chun. The 1st International Conference on Jointless Bridges. Fuzhou: Fuzhou University, 2014: 1-9.
    [29]
    XUE Jun-qing. Retrofit of existing bridges with concept of integral abutment bridge: static and dynamic parametric analysis[D]. Trento: University of Trento, 2013.
    [30]
    KAUFMANN W, ALVAREZ M. Swiss federal roads office guidelines for integral bridges[J]. Structural Engineering International, 2011, 21(2): 189-194. doi: 10.2749/101686611X12994961034057
    [31]
    FROSCH R J, LOVELL M D. Long-term behavior of integral abutment bridges[D]. Indiana: Purdue University, 2011.
    [32]
    HUNTLEY S A, VALSANGKAR A J. Nine-year field-monitoring data from an integral-abutment bridge[C]//ZHANG Xiong, COSENTINO P J, HUSSEIN M H. IFCEE 2018. Orlando: American Society of Civil Engineers, 2018: 101-111.
    [33]
    HUNTLEY S A, VALSANGKAR A J. Field monitoring of earth pressures on integral bridge abutments[J]. Canadian Geotechnical Journal, 2013, 50(8): 841-857. doi: 10.1139/cgj-2012-0440
    [34]
    KIM W S, LAMAN J A. Seven-year field monitoring of four integral abutment bridges[J]. Journal of Performance of Constructed Facilities, 2012, 26(1): 54-64. doi: 10.1061/(ASCE)CF.1943-5509.0000250
    [35]
    SIMAC M R, ELTON D J. 16-year performance update: geosynthetic reinforced soil walls as integral bridge abutment walls[C]//BRANDON T L, VALENTINE R J. Geotechnical Frontiers 2017. Orlando: American Society of Civil Engineers, 2017: 102-111.
    [36]
    HUANG Ji-min, SHIELD C K, FRENCH C. Time-dependent behavior of a concrete integral abutment bridge[C]//TRB. 6th International Bridge Engineering Conference. Boston: Transportation Research Board, 2005: 299-309.
    [37]
    PÉTURSSON H, KEROKOSKI O. Monitoring and analysis of abutment-soil interaction of two integral bridges[J]. Journal of Bridge Engineering, 2013, 18(1): 54-64. doi: 10.1061/(ASCE)BE.1943-5592.0000314
    [38]
    HOPPE E J. Field study of integral backwall with elastic inclusion[C]//FHWA. 2005 FHWA Conference on Integral Abutment and Jointless Bridges. Baltimore: West Virginia University, 2005: 257-269.
    [39]
    KIRUPAKARAN K, MURALEETHARAN K K, MILLER G A. Soil-structure interactions in a skewed integral abutment bridge[C]//ASCE. IFCEE 2015. San Antonio: American Society of Civil Engineers, 2015: 309-318.
    [40]
    BREÑA S F, BONCZAR C H, CIVJAN S A, et al. Evaluation of seasonal and yearly behavior of an integral abutment bridge[J]. Journal of Bridge Engineering, 2007, 12(3): 296-305. doi: 10.1061/(ASCE)1084-0702(2007)12:3(296)
    [41]
    SKORPEN S A, KEARSLEY E P, KRUGER E J. Measured temperature and shrinkage effects on a 90 m long integral bridge in South Africa[J]. Proceedings of the Institution of Civil Engineers: Bridge Engineering, 2018, 171(3): 169-178. doi: 10.1680/jbren.17.00019
    [42]
    SKORPEN S A, KEARSLEY E P, CLAYTON C R I. Structural health monitoring of an integral bridge[C]//DEJONG M J, SCHOOLING J M, VIGGIANI G M B. International Conference on Smart Infrastructure and Construction 2019. London: ICE Publishing, 2019: 743-749.
    [43]
    KIM S H, AHN J H, JUNG C Y, et al. Behaviour of steel-box semi-integral abutment bridge considering temperature-earth pressure change[J]. International Journal of Steel Structures, 2014, 14(1): 117-140. doi: 10.1007/s13296-014-1011-7
    [44]
    SANDFORD T, ELGAALY M. Skew effects on backfill pressures at frame bridge abutments[J]. Transportation Research Record, 1993, 1415: 1-11.
    [45]
    CIVJAN S A, KALAYCI E, QUINN B H, et al. Observed integral abutment bridge substructure response[J]. Engineering Structures, 2013, 56: 1177-1191. doi: 10.1016/j.engstruct.2013.06.029
    [46]
    HOPPE E J, GOMEZ J P. Field study of an integral backwall bridge[R]. Charlottesville: Virginia Transportation Research Council, 1996.
    [47]
    KONG B, CAI C S, KONG X. Field monitoring study of an integral abutment bridge supported by prestressed precast concrete piles on soft soils[J]. Engineering Structures, 2015, 104: 18-31.
    [48]
    GIRTON D D, HAWKINSON T R, GREIMANN L F. Validation of design recommendations for integral-abutment piles[J]. Journal of Structural Engineering, 1991, 117(7): 2117-2134. doi: 10.1061/(ASCE)0733-9445(1991)117:7(2117)
    [49]
    ABENDROTH R E, GREIMANN L F. Field testing of integral abutments[R]. Ames: Iowa State University, 2005.
    [50]
    LAFAVE J M, BRAMBILA G, KODE U, et al. Field behavior of integral abutment bridges under thermal loading[J]. Journal of Bridge Engineering, 2021, 26(4): 04021013. doi: 10.1061/(ASCE)BE.1943-5592.0001677
    [51]
    LAWVER A, FRENCH C, SHIELD C K. Field performance of integral abutment bridge[J]. Transportation Research Record, 2000, 1740: 108-117. doi: 10.3141/1740-14
    [52]
    HASSIOTIS S, LOPEZ J A, BERMUDEZ R. Full-scale testing of an integral abutment bridge[C]//FHWA. 2005 FHWA Conference on Integral Abutment and Jointless Bridges. Baltimore: West Virginia University, 2005: 199-210.
    [53]
    SHAO Xu-dong. New Structures of Jointless Bridge with Semi-Integral Abutment[M]. Beijing: China Communications Press, 2014. (in Chinese)
    [54]
    BAHJAT R. Short and long-term performance of a skewed integral abutment prestressed concrete bridge[D]. Amherst: University of Massachusetts Amherst, 2014.
    [55]
    DENG Y H, PHARES B M, GREIMANN L, et al. Behavior of curved and skewed bridges with integral abutments[J]. Journal of Constructional Steel Research, 2015, 109: 115-136. doi: 10.1016/j.jcsr.2015.03.003
    [56]
    OOI P S K, LIN X B, HAMADA H S. Field behavior of an integral abutment bridge supported on drilled shafts[J]. Journal of Bridge Engineering, 2010, 15(1): 4-18. doi: 10.1061/(ASCE)BE.1943-5592.0000036
    [57]
    ABENDROTH R E, GREIMANN L F, LAVIOLETTE M D. An integral abutment bridge with precast concrete piles[R]. Ames: Iowa State University, 2007.
    [58]
    JORGENSON J L. Behavior of abutment piles in an integral abutment in response to bridge movements[J]. Transportation Research Record, 1983, 903: 72-79.
    [59]
    DEJONG J T, HOWEY D S, CIVJAN S A, et al. Influence of daily and annual thermal variations on integral abutment bridge performance[C]//YEGIAN M K, KAVAZANJIAN E. GeoTrans 2004. Los Angeles: American Society of Civil Engineers, 2004: 496-505.
    [60]
    WENDNER R, STRAUSS A. Inclined approach slab solution for jointless bridges: performance assessment of the soil-structure interaction[J]. Journal of Performance of Constructed Facilities, 2015, 29(2): 04014045. doi: 10.1061/(ASCE)CF.1943-5509.0000522
    [61]
    HARTT S L, SANDFORD T C, DAVIS W G. Monitoring a pile-supported integral abutment bridge at a site with shallow bedrock[R]. Augusta: Maine DOT, 2006.
    [62]
    LI Dan-dan, LI Wen-hua. Experimental research on earth pressure behind integral bridge abutment[J]. Railway Engineering, 2014, 54(11): 33-36. (in Chinese) doi: 10.3969/j.issn.1003-1995.2014.11.10
    [63]
    GOEL R K. Earthquake characteristics of bridges with integral abutments[J]. Journal of Structural Engineering, 1997, 123(11): 1435-1443. doi: 10.1061/(ASCE)0733-9445(1997)123:11(1435)
    [64]
    LIU Yong-jian, LIU Jiang, ZHANG Ning. Review on solar thermal actions of bridge structures[J]. China Civil Engineering Journal, 2019, 52(5): 59-78. (in Chinese) doi: 10.15951/j.tmgcxb.2019.05.006
    [65]
    XUE Jun-qing, LIN Jian-hui, BRISEGHELLA B, et al. A state-of-the-art of research on solar radiation model for calculation of temperature distribution of bridge cross section[J]. Journal of Fuzhou University (Natural Science Edition), 2018, 46(4): 526-533. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-FZDZ201804011.htm
    [66]
    AKTAN H, ATTANAYAKE U, ULKU E. Combining link slab, deck sliding over backwall, and revising bearings[D]. Kalamazoo: Western Michigan University, 2008.
    [67]
    ENGLAND G L, TSANG N C M, BUSH D I. Integral Bridges: a Fundamental Approach to the Time-Temperature Loading Problem[M]. London: Thomas Telford, 2000.
    [68]
    OESTERLE R G, VOLZ J S. Effective temperature and longitudinal movement in integral abutment bridges[C]//FHWA. 2005 FHWA Conference on Integral Abutment and Jointless Bridges. Baltimore: West Virginia University, 2005: 302-311.
    [69]
    XUE Jun-qing, CHEN Bao-chun, LIN Jian-hui. Study of temperature expansion and contraction deformation of bridges with their deck slabs extended by hollow slabs[J]. Bridge Construction, 2018, 48(2): 37-42. (in Chinese) doi: 10.3969/j.issn.1003-4722.2018.02.007
    [70]
    RODRIGUEZ L E, BARR P J, HALLING M W. Temperature effects on a box-girder integral-abutment bridge[J]. Journal of Performance of Constructed Facilities, 2014, 28(3): 583-591. doi: 10.1061/(ASCE)CF.1943-5509.0000437
    [71]
    RUSSELL H G, GERKEN L J. Jointless bridges——the knowns and the unknowns[J]. Concrete International, 1994, 16(4): 44-48.
    [72]
    XUE Jun-qing, LIN Jian-hui, BRISEGHELLA B, et al. Research on influence of simulation method of inner boundary condition on temperature distributions on cross-sections of concrete box girders[J]. Bridge Construction, 2019, 49(4): 52-57. (in Chinese) doi: 10.3969/j.issn.1003-4722.2019.04.010
    [73]
    KUNIN J, ALAMPALLI S. Integral abutment bridges: current practice in United States and Canada[J]. Journal of Performance of Constructed Facilities, 2000, 14(3): 104-111. doi: 10.1061/(ASCE)0887-3828(2000)14:3(104)
    [74]
    LIU Yong-jian, LIU Jiang. Review on temperature action and effect of steel-concrete composite girder bridge[J]. Journal of Traffic and Transportation Engineering, 2020, 20(1): 42-59. (in Chinese) doi: 10.19818/j.cnki.1671-1637.2020.01.003
    [75]
    XUE Jun-qing, LIN Jian-hui, HUANG Fu-yun, et al. Simplified method to calculate average cross-section temperature of small box girder under extreme climate conditions[J]. Bridge Construction, 2021, 51(4): 53-59. (in Chinese) doi: 10.3969/j.issn.1003-4722.2021.04.008
    [76]
    LIN Jian-hui, BRISEGHELLA B, XUE Jun-qing, et al. Research on effective temperature of T-shaped girder for jointless bridges in China[C]//IABSE. 2019 IABSE Congress. New York: IABSE, 2019: 1265-1269.
    [77]
    LI Zhe-xi. Research on effective temperature and vertical temperature gradient of concrete girder in jointless bridge[D]. Fuzhou: Fuzhou University, 2021. (in Chinese)
    [78]
    MA Zhi-yuan, LIU Jiang, LIU Yong-jian, et al. Regional difference of value taking of effective temperature for steel-concrete composite girder bridges[J]. Journal of Zhejiang University (Engineering Science), 2022, 22(5): 1-11. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZDZC202205008.htm
    [79]
    ABID S R, TAYŞI N, ÖZAKÇA M. Experimental analysis of temperature gradients in concrete box-girders[J]. Construction and Building Materials, 2016, 106: 523-532. doi: 10.1016/j.conbuildmat.2015.12.144
    [80]
    OESTERLE R G, TABATABAI H, LAWSON T J, et al. Jointless and integral abutment bridges volume Ⅲ: summary report[R]. Washington DC: Federal Highway Administration, 1999.
    [81]
    FELDMANN M, NAUMES J, PAK D, et al. Economic and durable design of composite bridges with integral abutments[R]. Luxembourg: Publications Office of the European Union, 2010.
    [82]
    LIN Jian-hui. Research on effective temperature of jointless bridges in Fujian Province[D]. Fuzhou: Fuzhou University, 2018. (in Chinese)
    [83]
    LIU Yang. Research on temperature deformation of extended slab concrete jointless bridges[D]. Fuzhou: Fuzhou University, 2016. (in Chinese)
    [84]
    XUE Jun-qing, CHEN Bao-chun, BRISEGHELLA B, et al. Design, construction and monitoring of deck-extension bridge deck in expressway[J]. Journal of China and Foreign Highway, 2018, 38(6): 76-82. (in Chinese) doi: 10.14048/j.issn.1671-2579.2018.06.016
    [85]
    LIN Jian-hui, BRISEGHELLA B, XUE Jun-qing, et al. Temperature monitoring and response of deck-extension side-by-side box girder bridges[J]. Journal of Performance of Constructed Facilities, 2020, 34(2): 04019122. doi: 10.1061/(ASCE)CF.1943-5509.0001399
    [86]
    FAN Jian-sheng, LIU Cheng, LIU Yu-fei. Review of temperature distribution and temperature effects of steel-concrete composite girder bridges in China[J]. China Journal of Highway and Transport, 2020, 33(4): 1-13. (in Chinese) doi: 10.3969/j.issn.1001-7372.2020.04.001
    [87]
    LAI Xiu-ying. Research on effects of shrinkage and creep in concrete filled steel tubular arch bridges[D]. Fuzhou: Fuzhou University, 2016. (in Chinese)
    [88]
    WANG Lei, ZHANG Shu-jian, WANG Zhi-peng, et al. Effects of shrinkage and creep on jointless bridges[J]. Journal of Jilin University (Engineering and Technology Edition), 2008, 38(S2): 80-84. (in Chinese) doi: 10.13229/j.cnki.jdxbgxb2008.s2.020
    [89]
    SHERAFATI A, AZIZINAMINI A. Flexible pile head in jointless bridges: experimental investigation[J]. Journal of Bridge Engineering, 2015, 20(4): 04014071. doi: 10.1061/(ASCE)BE.1943-5592.0000628
    [90]
    VASHEGHANI-FARAHANI R, ZHAO Qiu-hong, BURDETTE E G. Seismic analysis of integral abutment bridge in Tennessee, including soil-structure interaction[J]. Transportation Research Record, 2010, 2201(1): 70-79. doi: 10.3141/2201-09
    [91]
    KIM W, LAMAN J A. Integral abutment bridge response under thermal loading[J]. Engineering Structures, 2010, 32(6): 1495-1508. doi: 10.1016/j.engstruct.2010.01.004
    [92]
    ERHAN S, DICLELI M. Effect of dynamic soil-bridge interaction modeling assumptions on the calculated seismic response of integral bridges[J]. Soil Dynamics and Earthquake Engineering, 2014, 66: 42-55. doi: 10.1016/j.soildyn.2014.06.033
    [93]
    PARK M C, NAM M S. Behavior of integral abutment bridge with partially protruded piles[J]. Geomechanics and Engineering, 2018, 14(6): 601-614.
    [94]
    MCCLELLAND B, FOCHT J. Soil modulus for laterally loaded piles[J]. Journal of the Soil Mechanics and Foundations Division, 1956, 82(4): 1-22.
    [95]
    ANDERSON J B, TOWNSEND F C, GRAJALES B. Case history evaluation of laterally loaded piles[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2003, 129(3): 187-196. doi: 10.1061/(ASCE)1090-0241(2003)129:3(187)
    [96]
    KIM B T, KIM N K, LEE W J, et al. Experimental load-transfer curves of laterally loaded piles in Nak-Dong River Sand[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2004, 130(4): 416-425. doi: 10.1061/(ASCE)1090-0241(2004)130:4(416)
    [97]
    GUO Wei-dong. Simple model for nonlinear response of 52 laterally loaded piles[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2013, 139(2): 234-252. doi: 10.1061/(ASCE)GT.1943-5606.0000726
    [98]
    RAZMI J. Effect of moisture on mechanical characteristic of soil and interaction of soil-pile in integral abutment bridges[J]. Bridge Structures, 2021, 16(2/3): 75-83.
    [99]
    YU Tian-lai, ZHOU Tian, JIANG Li-dong, et al. Study of calculating methods for earth pressure behind abutment of integral abutment bridge under action of rising temperatures[J]. Bridge Construction, 2010, 40 (1): 29-31, 35. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-QLJS201001009.htm
    [100]
    ZHENG Gang. Advanced Foundation Engineering[M]. Beijing: China Machine Press, 2007. (in Chinese)
    [101]
    HUANG Fu-yun, LIN You-wei, CHENG Jun-feng, et al. Interaction of integral abutment-H-shaped steel pile-soil under reciprocating low-cycle pseudo-static test[J]. China Journal of Highway and Transport, 2019, 32(5): 100-114. (in Chinese) doi: 10.19721/j.cnki.1001-7372.2019.05.010
    [102]
    HUANG Fu-yun, WU Sui-wen, LUO Xiao-ye, et al. Pseudo-static low cycle test on the mechanical behavior of PHC pipe piles with consideration of soil-pile interaction[J]. Engineering Structures, 2018, 171: 992-1006. doi: 10.1016/j.engstruct.2018.01.060
    [103]
    LUO Xiao-ye, HUANG Fu-yun, ZHUANG Yi-zhou, et al. Modified calculations of lateral displacement and soil pressure of pile considering pile-soil interaction under cyclic loads[J]. Journal of Testing and Evaluation, 2021, 49(4): 2840-2859.
    [104]
    CHEN Bao-chun, LUO Xiao-ye, HUANG Fu-yun, et al. Displacement-based simplified calculation for pile-soil interaction under reciprocating low-cycle pseudo-static loads[J]. Journal of Testing and Evaluation, 2021, 49(4): 2609-2626.
    [105]
    HENG Jiang-feng. Mechanical characteristics of integral abutment bridges with different substructures[D]. Xi'an: Chang'an University, 2018. (in Chinese)
    [106]
    ZHUANG Yi-zhou, YING Teng-yong, SU Hao, et al. Comparative study on seismic performance of main jointless bridges[J]. World Earthquake Engineering, 2021, 37(3): 73-84. (in Chinese) doi: 10.3969/j.issn.1007-6069.2021.03.009
    [107]
    SU Hao. Static characteristics and seismic behavior of three kinds of main jointless bridges[D]. Hangzhou: Zhejiang University of Technology, 2019. (in Chinese)
    [108]
    MIAO Ji-chao. Research on behavior and simplified design method of integral abutment bridges with concrete piles[D]. Hangzhou: Zhejiang University of Technology, 2017. (in Chinese)
    [109]
    RAZMI J, LADANI L, AGGOUR M S. Fatigue crack initiation and propagation in piles of integral abutment bridges[J]. Computer-Aided Civil and Infrastructure Engineering, 2013, 28(5): 389-402. doi: 10.1111/j.1467-8667.2012.00801.x
    [110]
    FROSCH R J, LOVELL M D. Long-term behavior of integral abutment bridges[R]. West Lafayette: Indiana Department of Transportation and Purdue University, 2011.
    [111]
    DAVIDS W G, SANDFORD T, ASHLEY S, et al. Field-measured response of an integral abutment bridge with short steel H-piles[J]. Journal of Bridge Engineering, 2010, 15(1): 32-43. doi: 10.1061/(ASCE)1084-0702(2010)15:1(32)
    [112]
    RAZMI J, LADANI L, AGGOUR S M. Finite element simulation of pile behaviour under thermo-mechanical loading in integral abutment bridges[J]. Structure and Infrastructure Engineering, 2014, 10(5): 643-653. doi: 10.1080/15732479.2012.757794
    [113]
    YU Tian-lai, ZHAO Yun-peng, SUN Xiao-long, et al. Analysis for mechanical properties of integral abutment bridge subjected to horizontal loads[J]. Journal of Shenyang Jianzhu University (Natural Science), 2014, 30(4): 600-608. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-SYJZ201404005.htm
    [114]
    HUANG Fu-yun, ZHOU Zhi-ming, ZHUANG Yi-zhou, et al. Experiment on interaction of high performance concrete pile-soil in IAJBs[J]. Rock and Soil Mechanics, 2022, 43(3): 591-601. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX202203003.htm
    [115]
    LUY D, ZHAO Da-jun, LI Long, et al. Solving internal forces of piles of jointless bridges under the action of temperature using ordinary differential systems[J]. Advanced Materials Research, 2014, 1082: 220-223. doi: 10.4028/www.scientific.net/AMR.1082.220
    [116]
    SHERAFATI A, CHAFI M S, AZIZINAMINI A. Buckling of piles in cohesive soil supporting jointless bridges[J]. Bridge Structures, 2012, 8(1): 15-24. doi: 10.3233/BRS-2012-0034
    [117]
    ZHAO Qiu-hong, QI Zhao-yang, AN Ze-yu, et al. Parametric analysis on seismic behavior of integral abutment steel bridge considering SSI[J]. Journal of Traffic and Transportation Engineering, 2018, 18(5): 35-46. (in Chinese) doi: 10.3969/j.issn.1671-1637.2018.05.004
    [118]
    LIN Peng-zhen, WU Fa-hui, YANG Zi-jiang. Mechanics analysis of bridge pile foundation considering slope effect[J]. China Railway Science, 2016, 37(4): 54-60. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK201604010.htm
    [119]
    LIU Jian-hua, ZHAO Ming-hua, YANG Ming-hui. Model tests on bridge pile foundation in high and steep rock slopes[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(3): 372-377. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC200903015.htm
    [120]
    WEI C L, BUCKLE I, ELFASS S. Lateral load capacity of abutment piles in sloping ground under jointless bridges[C]//CHEN Bao-chun. The 1st International Symposium on Jointless and Sustainable Bridges. Fuzhou: Fuzhou University, 2016: 36-44.
    [121]
    SHAN Yu-lin, HUANG Fu-yun, LUO Xiao-ye, et al. Pseudo-static test on interaction of soil-steel H-pile in integral abutment jointless bridges (IAJBs) under asymmetric conditions[J]. Journal of Hunan University (Natural Sciences), 2022, 49(3): 175-186. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HNDX202203017.htm
    [122]
    SHAN Yu-lin, HUANG Fu-yun, ZHOU Gui-ji, et al. Internal force calculation method of soil-steel H-pile considering unbalance earth pressure of backfill behind abutment in integral abutment jointless bridge[J]. Journal of Architecture and Civil Engineering, 2022, 39(1): 125-133. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-XBJG202201013.htm
    [123]
    KIM W S, LAMAN J A, ZAREIAN F, et al. Influence of construction joint and bridge geometry on integral abutment bridges[J]. Applied Sciences, 2021, 11(11): 5031.
    [124]
    VERMA M, MISHRA S S. Temperature-driven fatigue life of reinforced concrete integral bridge pile considering nonlinear soil-structure interaction[J]. Structural Concrete, 2020, 21(6): 2565-2583.
    [125]
    LEE J, JEONG Y, KIM W S. Buckling behavior of steel girder in integral abutment bridges under thermal loadings in summer season during deck replacement[J]. International Journal of Steel Structures, 2016, 16(4): 1071-1082.
    [126]
    WILLIAM G W, SHOUKRY S N, RIAD M Y, et al. Stability of steel girders under the effect of temperature variations and moving loads in integral abutment bridges[J]. Bridge Structures: Assessment, Design and Construction, 2009, 5(1): 45-59.
    [127]
    AU A, LAM C, AU J, et al. Eliminating deck joints using debonded link slabs: research and field tests in Ontario[J]. Journal of Bridge Engineering, 2013, 18(8): 768-778.
    [128]
    DING Yong, HUANG Qi, HUANG Jian-yuan. Theoretical analysis for static and dynamic characteristics of multi-simple-span bridge with continuous deck[J]. Engineering Mechanics, 2015, 32(9): 100-110. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201509015.htm
    [129]
    FARAJI S, TING J M, CROVO D S. Nonlinear analysis of integral bridges: finite-element model[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127(5): 454-461.
    [130]
    PENG Da-wen, CHEN Chao-wei, HONG Jin-xiang. Study of loaded property of abutment node of integral abutment bridges[J]. China Journal of Highway and Transport, 2005, 18(1): 46-50. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200501011.htm
    [131]
    DICLELI M, ERHAN S. Effect of soil-bridge interaction on the magnitude of internal forces in integral abutment bridge components due to live load effects[J]. Engineering Structures, 2010, 32(1): 129-145.
    [132]
    DICLELI M. Integral abutment-backfill behavior on sand soil-pushover analysis approach[J]. Journal of Bridge Engineering, 2005, 10(3): 354-364.
    [133]
    ZHU Wei-qing, LIU Yong-jian, HENG Jiang-feng, et al. Mechanical characteristics of integral abutment bridges with different substructures[J]. Journal of Architecture and Civil Engineering, 2017, 34(1): 49-57. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-XBJG201701008.htm
    [134]
    LIU Peng-fei. Numerical analysis of geosynthetic-reinforced soil integral abutment subjected to seismic loads[D]. Beijing: Tsinghua University, 2015. (in Chinese)
    [135]
    ZHU Zhi-hui, DAVIDSON M T, HARIK I E, et al. Effect of superstructure temperature changes on intermediate pier foundation stresses in integral abutment bridges[J]. Journal of Bridge Engineering, 2015, 20(1): 04014058.
    [136]
    KALAYCI E, CIVJAN S A, BREÑA S F, et al. Load testing and modeling of two integral abutment bridges in Vermont, US[J]. Structural Engineering International, 2011, 21(2): 181-188.
    [137]
    XIAO Y, CHEN L. Behavior of model steel H-pile-to-pile-cap connections[J]. Journal of Constructional Steel Research, 2013, 80: 153-162.
    [138]
    KARALAR M, DICLELI M. Fatigue in jointless bridge H-piles under axial load and thermal movements[J]. Journal of Constructional Steel Research, 2018, 147, 504-522.
    [139]
    FAR N E, MALEKI S, BARGHIAN M. Design of integral abutment bridges for combined thermal and seismic loads[J]. Earthquakes and Structures, 2015, 9(2), 415-430.
    [140]
    HUNTLEY S A, VALSANGKAR A J. Behaviour of H-piles supporting an integral abutment bridge[J]. Canadian Geotechnical Journal, 2014, 51(7): 713-734.
    [141]
    SALMAN N N, ISSA M A. Displacement capacities of H-piles in integral abutment bridges[J]. Journal of Bridge Engineering, 2019, 24(12): 04019122.
    [142]
    RAZMI J. Fracture mechanics-based and continuum damage modeling approach for prediction of crack initiation and propagation in integral abutment bridges[J]. Journal of Computing in Civil Engineering, 2016, 30(4): 4015061.
    [143]
    RAZMI J, LADANI L, AGGOUR M S. Fatigue life of piles in integral-abutment bridges: case study[J]. Journal of Bridge Engineering, 2013, 18(10): 1105-1117.
    [144]
    ABDOLLAHNIA H, ALIZADEH ELIZEI M H, REZA KASHYZADEH K. Low-cycle fatigue behavior of H-shaped steel piles of an integral concrete bridge subjected to temperature variations[J]. Materials Today: Proceedings. 2021, 46(4): 1657-1662.
    [145]
    KHODAIR Y A, HASSIOTIS S. Rigidity of abutments in integral abutment bridges[J]. Structure and Infrastructure Engineering, 2013, 9(2): 151-160,
    [146]
    MIRREZAEI S S, BARGHIAN M, GHAFFARZADEH H, et al. Retrofitting of steel pile-abutment connections of integral bridges using CFRP[J]. Structural Engineering and Mechanics, 2016, 59(2): 209-226.
    [147]
    YANG P S, WOLDE-TINSAE A M, GREIMANN L F. Effects of predrilling and layered soils on piles[J]. Journal of Geotechnical Engineering, 1985, 111(1): 18-31.
    [148]
    KHODAIR Y, HASSIOTIS S. Numerical and experimental analyses of an integral bridge[J]. International Journal of Advanced Structural Engineering, 2013, 5(1): 14.
    [149]
    SALMAN N N I. Parametric investigation of integral abutment bridges: behavior and pile buckling analysis[D]. Chicago: University of Illinois at Chicago, 2018.
    [150]
    GAO En-quan, CHEN Fang-dong, ZHENG Guo-ping. Research on practice and applicability of jointless bridge in Zhejiang Province[J]. Journal of Highway and Transportation Research and Development (Application Technology Edition), 2019, 15(5): 235-238. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GLJJ201905077.htm
    [151]
    KONG B, CAI C S, ZHANG Y. Parametric study of an integral abutment bridge supported by prestressed precast concrete piles[J]. Engineering Structures, 2016, 120: 37-48.
    [152]
    GAMA D, ALMEIDA J F. Concrete integral abutment bridges with reinforced concrete piles[J]. Structural Concrete, 2014, 15(3): 292-304.
    [153]
    XU Zhen. Retrofitting method and mechanical performance of jointless bridge of multi-span hollow-slabs[D]. Fuzhou: Fuzhou University, 2020. (in Chinese)
    [154]
    XU Zhen, LUO Xiao-ye, CHEN Bao-chun, et al. Mechanical performance of multi-span semi-rigid integral bridge under uniform temperature[J]. Journal of Fuzhou University (Natural Science Edition), 2019, 47(5): 669-674, 682. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-FZDZ201905018.htm
    [155]
    ZHUANG Yi-zhou, HUANG Fu-yun, QIAN Hai-min, et al. Pseudo-static test research on mechanic behavior of PHC piles with soil-pile interaction[J]. China Journal of Highway and Transport, 2017, 30(4): 42-51, 71. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201704006.htm
    [156]
    HUANG Fu-yun, QIAN Hai-min, FU Cui, et al. Displacement-based simplified calculation on soil-pile interaction of PHC pipe-piles[J]. China Journal of Highway and Transport, 2018, 31(3): 68-79, 88. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201803009.htm
    [157]
    HUANG Fu-yun, HE Ling-feng, SHAN Yu-lin, et al. Experiment on interaction of prestressed pile-soil in integral bridge[J]. Journal of Architecture and Civil Engineering, 2021, 38(1): 31-40. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-XBJG202101005.htm
    [158]
    ABENDROTH R E, GREIMANN L F, EBNER P B. Abutment pile design for jointless bridges[J]. Journal of Structural Engineering, 1989, 115(11): 2914-2929.
    [159]
    GREIMANN L, WOLDE-TINSAE A M. Design model for piles in jointless bridges[J]. Journal of Structural Engineering, 1988, 114(6): 1354-1371.
    [160]
    LAN C, BRISEGHELLA B, FENU L, et al. The optimal shapes of piles in integral abutment bridges[J]. Journal of Traffic and Transportation Engineering (English Edition), 2017, 4(6): 576-593.
    [161]
    LUO Xiao-ye, CHEN Bao-chun, HUANG Fu-yun, et al. Mechanical property of integral bridge supported by different types of pile foundations[J]. Journal of Architecture and Civil Engineering, 2020, 37(5): 151-160. (in Chinese) doi: 10.19815/j.jace.2019.12002
    [162]
    HUANG Fu-yun, SHAN Yu-lin, JAVANMARDI A, et al. Seismic performance of various piles considering soil-pile interaction under lateral cycle loads for integral abutment jointless bridges (IAJBs)[J]. Applied Sciences, 2020, 10(10): 3406. doi: 10.3390/app10103406
    [163]
    QUINN B H, CIVJAN S A. Parametric study on effects of pile orientation in integral abutment bridges[J]. Journal of Bridge Engineering, 2017, 22(4): 04016132. doi: 10.1061/(ASCE)BE.1943-5592.0000952
    [164]
    XU Ming, LIU Peng-fei. Research on integral bridge abutments[J]. Engineering Mechanics, 2016, 33(4): 1-8. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201604003.htm
    [165]
    WALTER J R, MORSY A M, ZORNBERG J G. Experimental and numerical investigation of lateral earth pressures generated from repeated loading[C]//LEMNITZER A, STUEDLEIN A W, SULEIMAN M T. IFCEE 2018. Reston: American Society of Civil Engineers, 2018: 158-168.
    [166]
    NAM M S, PARK Y H. Relationship between earth pressure and thermally induced movement of integral abutments[J]. Journal of Performance of Constructed Facilities, 2015, 29(4): 04014093. doi: 10.1061/(ASCE)CF.1943-5509.0000562
    [167]
    ALIZADEH M H, RASHID A R K, CHIK Z, et al. Investigation of abutment displacement of a full height integral bridges in dense granule backfill[J]. American Journal of Engineering and Applied Sciences, 2010, 3(4): 749-756. doi: 10.3844/ajeassp.2010.749.756
    [168]
    OESTERLE R G, TABATABAI H. Design considerations for integral abutment/jointless bridges in the USA[C]//CHEN Bao-chun. The 1st International Symposium on Jointless Bridges. Fuzhou: Fuzhou University, 2014: 71-101.
    [169]
    LUO Sha, DE LUCA F, DE RISI R, et al. Challenges and perspectives for integral bridges in the UK: PLEXUS small-scale laboratory experiments[J]. Proceedings of the Institution of Civil Engineers-Smart Infrastructure and Construction, 2022, 175(1): 27-43. doi: 10.1680/jsmic.21.00020
    [170]
    MOVAHEDIFAR M, BOLOURI-BAZAZ J. An investigation on the effect of cyclic displacement on the integral bridge abutment[J]. Journal of Civil Engineering and Management, 2014, 20(2): 256-269. doi: 10.3846/13923730.2013.802707
    [171]
    LIN Shang-shun, LIN You-wei, HUANG Fu-yun, et al. Method to calculate earth pressure of backfill of integral abutment bridges under the action of reciprocating longitudinal displacement[J]. China Journal of Highway and Transport, 2019, 32(2): 116-125. (in Chinese) doi: 10.3969/j.issn.1001-7372.2019.02.012
    [172]
    NG C, SPRINGMAN S, NORRISH A. Soil-structure interaction of spread-base integral bridge abutments[J]. Soils and Foundations, 1998, 38(1): 145-162. doi: 10.3208/sandf.38.145
    [173]
    XU Ming, GUO Jin-wu. DEM study on the development of the earth pressure of granular materials subjected to lateral cyclic loading[J]. Computers and Geotechnics, 2021, 130: 103915. doi: 10.1016/j.compgeo.2020.103915
    [174]
    XU Ming. Laboratory study of the behavior of granular soils behind integral bridge abutments[J]. China Civil Engineering Journal, 2010, 4(5): 136-141. (in Chinese) doi: 10.15951/j.tmgcxb.2010.05.002
    [175]
    XU Ming, BLOODWORTH A G, CLAYTON C R I. Behavior of a stiff clay behind embedded integral abutments[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2007, 133(6): 721-730. doi: 10.1061/(ASCE)1090-0241(2007)133:6(721)
    [176]
    CLAYTON C R I, XU M, BLOODWORTH A. A laboratory study of the development of earth pressure behind integral bridge abutments[J]. Géotechnique, 2006, 56(8): 561-571. doi: 10.1680/geot.2006.56.8.561
    [177]
    BLOODWORTH A G, XU Ming, BANKS J R, et al. Predicting the earth pressure on integral bridge abutments[J]. Journal of Bridge Engineering, 2012, 17(2): 37l-381.
    [178]
    BROMS B B, INGELSON I. Earth pressure against the abutments of a rigid frame bridge[J]. Géotechnique, 1971, 21(1): 15-28. doi: 10.1680/geot.1971.21.1.15
    [179]
    DICLELI M. A rational design approach for prestressed- concrete-girder integral bridges[J]. Engineering Structures, 2000, 22(3): 230-245. doi: 10.1016/S0141-0296(98)00080-7
    [180]
    XU Ming, CLAYTON C R I, BLOODWORTH A G. The earth pressure behind full-height frame integral abutments supporting granular fill[J]. Canadian Geotechnical Journal, 2007, 44(3): 284-298. doi: 10.1139/t06-122
    [181]
    ARGYROUDIS S, PALAIOCHORINOU A, MITOULIS S, et al. Use of rubberised backfills for improving the seismic response of integral abutment bridges[J]. Bulletin of Earthquake Engineering, 2016, 14(12): 3573-3590. doi: 10.1007/s10518-016-0018-1
    [182]
    CUI L, MITOULIS S. DEM analysis of green rubberised backfills towards future smart integral abutment bridges (IABs)[C]//SOGA K, KUMAR K, BISCONTIN G, et al. Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro. Boca Raton: CRC Press, 2014: 583-588.
    [183]
    MIR MOHAMMAD HOSSEINI S M, KHATIBI F. Earth pressure behind an integral bridge abutment under traffic loadings[J]. Arabian Journal for Science and Engineering, 2013, 38(10): 2619-2629. doi: 10.1007/s13369-013-0612-3
    [184]
    SHAN Yu-lin, HUANG Fu-yun, LUO Xiao-ye, et al. Study on calculation method of larger unbalanced earth pressure of backfill behind abutment in integral abutment jointless bridges[J]. Journal of Zhengzhou University (Engineering Science), 2022, 43(2): 84-90, 104. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZZGY202202013.htm
    [185]
    FENNEMA J L, LAMAN J A, LINZELL D G. Predicted and measured response of an integral abutment bridge[J]. Journal of Bridge Engineering, 2005, 10(6): 666-677. doi: 10.1061/(ASCE)1084-0702(2005)10:6(666)
    [186]
    DICLELI M. Simplified model for computer-aided analysis of integral bridges[J]. Journal of Bridge Engineering, 2000, 5(3): 240-248. doi: 10.1061/(ASCE)1084-0702(2000)5:3(240)
    [187]
    ZHAO Yun-peng, YU Tian-lai, BI Rui-feng. Study of earth pressure behind abutment of integral bridge under action of temperature load[J]. Bridge Construction, 2016, 46(6): 56-60. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-QLJS201606012.htm
    [188]
    DENTON S, CHRISTIE T, SHAVE J, et al. PD 6694-1: recommendations for the design of structures subject to traffic loading to EN 1997-1[C]//DENTON S. Bridge Design to Eurocodes: UK Implementation. London: ICE Publishing, 2011: 434-450.
    [189]
    ABDEL-FATTAH M T, ABDEL-FATTAH T T. Behavior of integral frame abutment bridges due to cyclic thermal loading: nonlinear finite-element analysis[J]. Journal of Bridge Engineering, 2019, 24(5): 04019031. doi: 10.1061/(ASCE)BE.1943-5592.0001394
    [190]
    ABDEL-FATTAH M T, ABDEL-FATTAH T T, HEMADA A A. Nonlinear finite-element analysis of integral abutment bridges due to cyclic thermal changes[J]. Journal of Bridge Engineering, 2018, 23(2): 04017134. doi: 10.1061/(ASCE)BE.1943-5592.0001183
    [191]
    XU Ming, LIN Yong-zhi, ZHOU Wen-xuan. Back analysis of build-up effect of earth pressure behind integral abutments[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 163-172. http://www.cnki.com.cn/Article/CJFDTOTAL-JYGC202205009.htm
    [192]
    SANDBERG J, ARGYLE T, PETTY R, et al. The design of integral bridges with bankseat, halt-height and full-height abutments on the A14, UK[J]. Proceedings of the Institution of Civil Engineers: Bridge Engineering, 2018, 171(3): 222-234. doi: 10.1680/jbren.17.00018
    [193]
    STEIGER H, ZEIßLER T, BERNHARD M, et al. Integrale großbrücken mit flexiblen widerlagern[J]. Beton-Und Stahlbetonbau, 2012, 107(3): 175-182. doi: 10.1002/best.201100082
    [194]
    MA Jing, JIN Xiao-qin. Design philosophy of Guandong Qingyuan Sijiu Bridge-the first integral bridge without expansion in China[J]. Central South Highway Engineering, 2002, 27(2): 32-34. (in Chinese) doi: 10.3969/j.issn.1674-0610.2002.02.013
    [195]
    CHEN Hong, XUE Jun-qing, BRISEGHELLA B, et al. Design and construction of an integral abutment bridge[C]//LU Xin-zheng. The 26th National Conference on Structural Engineering. Changsha: Engineering Mechanics Press, 2017: 356-361. (in Chinese)
    [196]
    WANG Qian-qian, GUO Xiao-yan, YAN Guo-qi. Parametric study on the mechanical properties of integral bridges[J]. Journal of Railway Science and Engineering, 2018, 15(9): 2276-2284. (in Chinese) doi: 10.19713/j.cnki.43-1423/u.2018.09.014
    [197]
    ZHU Wei-qing, HENG Jiang-feng, LIU Yong-jian, et al. Mechanical characteristics of jointless bridge with wall-type integral abutment[J]. Journal of Traffic and Transportation Engineering, 2017, 17(6): 36-45. (in Chinese) doi: 10.3969/j.issn.1671-1637.2017.06.005
    [198]
    XUE Jun-qing, BRISEGHELLA B, LIN Jian-hui, et al. Design and field tests of a deck-extension bridge with small box girder[J]. Journal of Traffic and Transportation Engineering (English Edition), 2018, 5(6): 467-479. doi: 10.1016/j.jtte.2018.10.004
    [199]
    ZORDAN T, BRISEGHELLA B, LAN Cheng. Parametric and pushover analyses on integral abutment bridge[J]. Engineering Structures, 2011, 33(2): 502-515. doi: 10.1016/j.engstruct.2010.11.009
    [200]
    PUGASAP K, KIM W, LAMAN J A. Long-term response prediction of integral abutment bridges[J]. Journal of Bridge Engineering, 2009, 14(2): 129-139. doi: 10.1061/(ASCE)1084-0702(2009)14:2(129)
    [201]
    KIM W S, LAMAN J A, JEONG Y, et al. Comparative study of integral abutment bridge structural analysis methods[J]. Canadian Journal of Civil Engineering, 2016, 43(4): 378-389. doi: 10.1139/cjce-2015-0202
    [202]
    JIN Yong-xue, XU Dong, ZHENG Ming-wan, et al. Analysis of an integral abutment bridge based on unified boundary condition and grillage model[J]. Journal of Tongji University (Natural Science), 2021, 49(1): 40-48. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ202101006.htm
    [203]
    PERI AC'G D, MILETI AC'G M, SHAH B R, et al. Thermally induced soil structure interaction in the existing integral bridge[J]. Engineering Structures, 2016, 106: 484-494. doi: 10.1016/j.engstruct.2015.10.032
    [204]
    BRISEGHELLA B, ZORDAN T. Integral abutment bridge concept applied to the rehabilitation of a simply supported concrete structure[J]. Structural Concrete, 2007, 8(1): 25-33. doi: 10.1680/stco.2007.8.1.25
    [205]
    LAFAVE J M, RIDDLE J K, JARRETT M W, et al. Numerical simulations of steel integral abutment bridges under thermal loading[J]. Journal of Bridge Engineering. 2016, 21(10): 04016061. doi: 10.1061/(ASCE)BE.1943-5592.0000919
    [206]
    KIM W S, LAMAN J A. Numerical analysis method for long-term behavior of integral abutment bridges[J]. Engineering Structures, 2010, 32(8): 2247-2257. doi: 10.1016/j.engstruct.2010.03.027
    [207]
    THANOON W A, ABDULRAZEG A A, NOORZAEI J, et al. Soil structure interaction for integral abutment bridge using spring analogy approach[J]. IOP Conference Series: Materials Science and Engineering. 2011, 17: 012035. doi: 10.1088/1757-899X/17/1/012035
    [208]
    KRIZEK J. Soil-structure interaction of integral bridges[J]. Structural Engineering International, 2011, 21(2): 169-174. doi: 10.2749/101686611X12994961034372
    [209]
    ZORDAN T, BRISEGHELLA B, LAN Cheng. Analytical formulation for limit length of integral abutment bridges[J]. Structural Engineering International, 2011, 21(3): 304-310. doi: 10.2749/101686611X13049248220654
    [210]
    DAVID T K, FORTH J P, YE Jian-qiao. Superstructure behavior of a stub-type integral abutment bridge[J]. Journal of Bridge Engineering, 2014, 19(6): 04014012. doi: 10.1061/(ASCE)BE.1943-5592.0000583
    [211]
    PAUL M, LAMAN J A, LINZELL D G. Thermally induced superstructure stresses in prestressed girder integral abutment bridges[J]. Journal of the Transportation Research Board, 2005, 11S: 287-297. doi: 10.3141/trr.11s.x5n68617433k3117
    [212]
    RAZMI J, MCCABE M. Analytical and computational modeling of integral abutment bridges foundation movement due to seasonal temperature variations[J]. International Journal of Geomechanics, 2020, 20(3): 04019189. doi: 10.1061/(ASCE)GM.1943-5622.0001622
    [213]
    ALBHAISI S, NASSIF H, HWANG E S. Effect of substructure stiffness on performance of steel integral abutment bridges under thermal loads[J]. Journal of the Transportation Research Board, 2012, 2313: 22-32. doi: 10.3141/2313-03
    [214]
    PRAJAPATI S P, SHAH N A, ZALA J. Structural behaviour analysis of integral type bridge with influence of modulus of subgrade reaction of soil[J]. International Journal of Pure and Applied Research in Engineering and Technology, 2018, 6(10): 31-46.
    [215]
    YU Tian-lai, LI Hai-sheng, ZHENG Bin-shuang, et al. Influence of abutment height on integral abutment bridges internal force[J]. Science Technology and Engineering, 2017, 17(19): 241-246. (in Chinese) doi: 10.3969/j.issn.1671-1815.2017.19.044
    [216]
    NAJI M, FIROOZI A A, FIROOZI A A. A review: study of integral abutment bridge with consideration of soil-structure interaction[J]. Latin American Journal of Solids and Structures, 2020, 17(2): e252. doi: 10.1590/1679-78255869
    [217]
    RAZZAQ M K, SENNAH K, GHRIB F. Effect of sequence of construction on the moment distribution of skewed integral abutment bridges[C]//CHEN Bao-chun. The 1st International Symposium on Jointless and Sustainable Bridges. Fuzhou: Fuzhou University, 2016: 42-53.
    [218]
    BIANA I. A semi-integral composite bridge of high skew[J]. Proceedings of the Institution of Civil Engineers: Bridge Engineering, 2010, 163(3): 115-124. doi: 10.1680/bren.2010.163.3.115
    [219]
    KALAYCI E, CIVJAN S A, BREÑA S F. Parametric study on the thermal response of curved integral abutment bridges[J]. Engineering Structures, 2012, 43: 129-138. doi: 10.1016/j.engstruct.2012.05.007
    [220]
    XU Zhen, LUO Xiao-ye, LU Qi, et al. Trial-design study on integral curved bridge[J]. Journal of Architecture and Civil Engineering, 2019, 36(6): 104-111. (in Chinese) doi: 10.3969/j.issn.1673-2049.2019.06.013
    [221]
    LI Bing, HU Yu-liu. Mechanical characteristics of concrete curved bridge after integral transformation[J]. Journal of Dongguan University of Technology, 2021, 28(1): 82-89. doi: 10.16002/j.cnki.10090312.2021.01.014
    [222]
    HOFFMAN J, PHARES B. Thermal load design philosophies for horizontally curved girder bridges with integral abutments[J]. Journal of Bridge Engineering, 2014, 19(5): 04014008. doi: 10.1061/(ASCE)BE.1943-5592.0000573
    [223]
    BAPTISTE K T, KIM W S, LAMAN J A. Parametric study and length limitations for prestressed concrete girder integral abutment bridges[J]. Structural Engineering International, 2011, 21(2): 151-156. doi: 10.2749/101686611X12994961034219
    [224]
    BRISEGHELLA B, XUE Jun-qing, LAN Cheng, et al. Maximum length of integral abutment bridge[J]. Journal of Architecture and Civil Engineering, 2014, 31(1): 104-110. (in Chinese) doi: 10.3969/j.issn.1673-2049.2014.01.013
    [225]
    STRAUSS A, KRAWTSCHUK A, WENDNER R, et al. Monitoring based assessment of a jointless bridge[C]//BIONDINI F, FRANGOPOL D M. Proceedings of the Sixth International Conference on Bridge Maintenance, Safety, Management, Resilience and Sustainability. London: Taylor and Francis Group, 2012: 922-929.
    [226]
    KIM W S, LAMAN J A. Integral abutment bridge behavior under uncertain thermal and time-dependent load[J]. Structural Engineering and Mechanics, 2013, 46(1): 53-73. doi: 10.12989/sem.2013.46.1.053
    [227]
    BRISEGHELLA B, TANG Yu-feng, XUE Jun-qing, et al. Review of research on approach slabs in jointless bridges[J]. Journal of Fuzhou University (Natural Science Edition), 2021, 49(2): 209-216. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-FZDZ202102011.htm
    [228]
    WHITE Ⅱ H, PÉTURSSON H, COLLIN P. Integral abutment bridges: the european way[J]. Practice Periodical on Structural Design and Construction, 2010, 15(3): 201-208. doi: 10.1061/(ASCE)SC.1943-5576.0000053
    [229]
    AL-QARAWI A, LEO C, LIYANAPATHIRANA D S. Effects of wall movements on performance of integral abutment bridges[J]. International Journal of Geomechanics, 2020, 20(2): 04019157. doi: 10.1061/(ASCE)GM.1943-5622.0001559
    [230]
    MARTIN R D, KANG T H K. Structural design and construction issues of approach slabs[J]. Practice Periodical on Structural Design and Construction, 2013, 18(1): 12-20. doi: 10.1061/(ASCE)SC.1943-5576.0000133
    [231]
    AKIYAMA H. Fundamentally structural characteristics of integral bridges[D]. Kanazawa: Kanazawa University, 2008.
    [232]
    CONNAL J. Integral abutment bridges-Australian and US practice[C]//Austroads. Austroads 5th Bridge Conference. Hobart: Austroads, 2004.
    [233]
    PHARES B M, FARIS A S, GREIMANN L, et al. Integral bridge abutment to approach slab connection[J]. Journal of Bridge Engineering, 2013, 18(2): 179-181. doi: 10.1061/(ASCE)BE.1943-5592.0000333
    [234]
    ZHANG Pei-quan. Mechanical analysis of plate-type approach slab of jointless bridges[D]. Fuzhou: Fuzhou University, 2015. (in Chinese)
    [235]
    SONG Zheng, ZHU Qi-kun. Calculation of elastic foundation beam considering the tangential friction[J]. Journal of Wuhan Institute of Technology, 2010, 32(9): 43-45. (in Chinese) doi: 10.3969/j.issn.1674-2869.2010.09.012
    [236]
    ZHUANG Yi-zhou, XU Liang, HUANG Yan-jun. One way about internal force calculation of approach slab in semi-integral abutment bridge[J]. Journal of Architecture and Civil Engineering, 2016, 33(5): 35-43. (in Chinese) doi: 10.3969/j.issn.1673-2049.2016.05.007
    [237]
    TANG Yu-feng, BRISEGHELLA B, XUE Jun-qing, et al. Research on friction between grade flat approach slab and sliding material in jointless bridges[C]//IABSE. 2019 IABSE Congress. New York: IABSE, 2019: 959-963.
    [238]
    FU Cui, ZHUANG Yi-zhou, CHEN Bao-chun. Trial-design study on jointless bridge with approach slab supported by micro-piles[J]. Journal of Architecture and Civil Engineering, 2017, 34(4): 96-104. (in Chinese) doi: 10.3969/j.issn.1673-2049.2017.04.013
    [239]
    ZHUANG Yi-zhou, QIAN Hai-min, HAN Yu-tian, et al. Study on the mechanical properties of approach slab of semi-integral abutment skew bridges under thermal load[J]. Journal of Fuzhou University (Natural Science Edition), 2016, 44(4): 480-486. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-FZDZ201604006.htm
    [240]
    DREIER D, BURDET O, MUTTONI A. Transition slabs of integral abutment bridges[J]. Structural Engineering International, 2011, 21(2): 144-150.
    [241]
    BURDET O, EINPAUL J, MUTTONI A. Experimental investigation of soil-structure interaction for the transition slabs of integral bridges[J]. Structural Concrete, 2015, 16(4): 470-479. doi: 10.1002/suco.201500018
    [242]
    WENDNER R, STRAUSS A, BERGMEISTER K. Jointless bridges-performance assessment of soil-structure interaction[C]//FABER M H, KÖHLER J, NISHIJIMA K. Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering. London: Taylor and Francis Group, 2011: 1069-1076.
    [243]
    GANGONE M V, WHELAN M J, JANOYAN K D, et al. Experimental characterization and diagnostics of the early-age behavior of a semi-integral abutment FRP deck bridge[J]. Sensor Review, 2012, 32(4): 296-309. doi: 10.1108/02602281211257533
    [244]
    KONG B, CAI C S, KONG X. Thermal property analysis and applications of GFRP panels to integral abutment bridges[J]. Engineering Structures, 2014, 76: 1-9. doi: 10.1016/j.engstruct.2014.06.009
    [245]
    CHEN Bao-chun, JI Tao, HUANG Qing-wei, et al. Review of research on ultra-high performance concrete[J]. Journal of Architecture and Civil Engineering, 2014, 31(3): 1-24. (in Chinese) doi: 10.3969/j.issn.1673-2049.2014.03.002
    [246]
    XUE Jun-qing, BRISEGHELLA B, HUANG Fu-yun, et al. Review of ultra-high performance concrete and its application in bridge engineering[J]. Construction and Building Materials, 2020, 260: 119844. doi: 10.1016/j.conbuildmat.2020.119844
    [247]
    VOO Y L, FOSTER J. Design and construction of the 100 metre span UHPC batu 6 segmental box girder bridge[C]//MIDDENDORF B, FEHLING E, WETZEL A. The 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials. Kassel: Kassel University Press, 2016: 1-8.
    [248]
    HONG Yu. Analysis and design of link slabs in jointless bridges with fibre-reinforced concrete[D]. Waterloo: University of Waterloo, 2014.
    [249]
    SABER A, ALETI A R. Behavior of FRP link slabs in jointless bridge decks[J]. Advances in Civil Engineering, 2012, 2012.
    [250]
    HOU Meng-jun, HU Ke-xu, YU Jiang-tao, et al. Experimental study on ultra-high ductility cementitious composites applied to link slabs for jointless bridge decks[J]. Composite Structures, 2018, 204: 167-177. doi: 10.1016/j.compstruct.2018.07.067
    [251]
    ZHANG Li-fei, ZHENG Yu, YU Yong, et al. Structural performance evaluation of ECC link slabs reinforced with FRP bars for jointless bridge decks[J]. Construction and Building Materials, 2021, 304: 124462. doi: 10.1016/j.conbuildmat.2021.124462
    [252]
    ZHANG Pu, SHANG Jia-qi, FAN Jia-jun, et al. Experimental study on the bond behavior of the CFRP plate-ECC-concrete composite interface under freeze-thaw cycles[J]. Construction and Building Materials, 2022, 316: 125822. doi: 10.1016/j.conbuildmat.2021.125822
    [253]
    KARIM R, SHAFEI B. Performance of fiber-reinforced concrete link slabs with embedded steel and GFRP rebars[J]. Engineering Structures, 2021, 229: 111590. doi: 10.1016/j.engstruct.2020.111590
    [254]
    LIU Qi-wei, XU Chong-fa, GUO Jian, et al. Study on the application of mma material in deck continuity of bridge[J]. Jiangsu Transportation Research, 2019(1): 6-9, 15. (in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10213-1017739298.htm
    [255]
    DOIRON G, WHITE P. UHPC link slab solutions in North America[C]//TOUTLEMONDE F, RESPENDINO J. 3rd International Symposium on Ultra-High Performance Fibre-Reinforced Concrete. Montpellier: RILEM Publications, 2017: 975-982.
    [256]
    GRAYBEAL B A. Emerging UHPC-based bridge construction and preservation solutions[C]//TOUTLEMONDE F, RESPENDINO J. 3rd International Symposium on Ultra-High Performance Fibre-Reinforced Concrete. Montpellier: RILEM Publications, 2017: 965-974.
    [257]
    LIN Jian-hui, BRISEGHELLA B, XUE Jun-qing, et al. Research on flexural performance and crack width calculation method of ultra-high performance concrete link slab[J]. Bridge Construction, 2022, 52(10): 60-68. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-QLJS202205009.htm
    [258]
    SHAABAN M, AHMED S. Development of ultra-high performance concrete jointed precast decks and concrete piles in integral abutment bridges[C]//CHEN Bao-chun. The 1st International Symposium on Jointless and Sustainable Bridges. Fuzhou: Fuzhou University, 2016: 1-10.
    [259]
    BIRCKEL T, WEIHER H. Innovative post-tensioning concept with UHPC anchorages (hybridanker) for railway bridge for Spoorbypass Mechelen[C]//HORDIJK D A, LUKOVIC M. High Tech Concrete: Where Technology and Engineering Meet. Maastricht: Springer International Publishing, 2018: 2638-2644.
    [260]
    DE JONG A. Innovations in integral abutment connection details for accelerated bridge construction[D]. Ames: Iowa State University, 2019.
    [261]
    KIM S H, YOON J H, KIM J H, et al. Structural details of steel girder-abutment joints in integral bridges: an experimental study[J]. Journal of Constructional Steel Research, 2012, 70: 190-212. doi: 10.1016/j.jcsr.2011.07.009
    [262]
    BRISEGHELLA B, ZORDAN T. An innovative steel-concrete joint for integral abutment bridges[J]. Journal of Traffic and Transportation Engineering (English Edition), 2015, 2(4): 209-222. doi: 10.1016/j.jtte.2015.05.001
    [263]
    LIANG Chen, LIU Yu-qing, ZHAO Chang-jun, et al. Experimental and numerical study on an innovative girder-abutment joint in composite bridges with integral abutments[J]. Construction and Building Materials, 2018, 186: 709-730. doi: 10.1016/j.conbuildmat.2018.07.208
    [264]
    MORGENTHAL G, OLNEY P. Concrete hinges and integral bridge piers[J]. Journal of Bridge Engineering, 2016, 21(1): 06015005. doi: 10.1061/(ASCE)BE.1943-5592.0000783
    [265]
    NG K W, GARDER J, SRITHARAN S. Investigation of ultra high performance concrete piles for integral abutment bridges[J]. Engineering Structures, 2015, 105: 220-230. doi: 10.1016/j.engstruct.2015.10.009
    [266]
    GARDER J A. Use of UHPC piles in integral abutment bridges[D]. Ames: Iowa State University, 2012.
    [267]
    SULEIMAN M T, VANDE VOORT T, SRITHARAN S. Behavior of driven ultrahigh-performance concrete H-piles subjected to vertical and lateral loadings[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2010, 136(10): 1403-1413. doi: 10.1061/(ASCE)GT.1943-5606.0000350
    [268]
    DAI Yi-xin. Experimental research on the compressive properties of H-shaped UHPC columns piles in integral abutment bridge[D]. Fuzhou: Fuzhou University, 2018. (in Chinese)
    [269]
    CHEN Bao-chun, CHEN Guo-dong, SU Jia-zhan, et al. Trial-design study on integral abutment bridge by using UHPC-RC stagewise piles[J]. Journal of Architecture and Civil Engineering, 2018, 35(1): 1-8. (in Chinese) doi: 10.3969/j.issn.1673-2049.2018.01.001
    [270]
    ZHUANG Yi-zhou, SONG Kun-sheng, SONG Yong-qing, et al. Quasi-static test on H-shaped steel-RC stepped pile-soil interaction of integral abutment bridge[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 145-162. (in Chinese) doi: 10.19818/j.cnki.1671-1637.2022.05.008
    [271]
    CHEN Guo-dong. Trail-design study on integral abutment bridge by using UHPC-RC segmental piles[D]. Fuzhou: Fuzhou University, 2019. (in Chinese)
    [272]
    GUPTA K. Behavior of fiber reinforced polymer piles with octagonal cross-sections in integral abutment bridge foundations[D]. College Park: University of Maryland, College Park, 2020.
    [273]
    AZIZINAMINI A, YAKEL A, SHERAFATI A, et al. Flexible pile head in jointless bridges: design provisions for H-piles in cohesive soils[J]. Journal of Bridge Engineering, 2016, 21(3): 04015064 doi: 10.1061/(ASCE)BE.1943-5592.0000791
    [274]
    LEE J, KIM W S, KIM K, et al. Strengthened and flexible pile-to-pile cap connections for integral abutment bridges[J]. Steel and Composite Structures, 2016, 20(4): 731-748. doi: 10.12989/scs.2016.20.4.731
    [275]
    AHN J H, YOON J H, KIM J H, et al. Evaluation on the behavior of abutment-pile connection in integral abutment bridge[J]. Journal of Constructional Steel Research, 2011, 67(7): 1134-1148. doi: 10.1016/j.jcsr.2011.02.007
    [276]
    QI Chao-yang. Experimental research on seismic behavior of integral abutment-pile joint[D]. Tianjin: Tianjin University, 2017. (in Chinese)
    [277]
    ALQARAWI A S, LEO C J, LIYANAPATHIRANA D S, et al. Parametric study on the approach problem of an integral abutment bridge subjected to cyclic loading due to temperature changes[J]. Applied Mechanics and Materials, 2016, 846: 421-427. doi: 10.4028/www.scientific.net/AMM.846.421
    [278]
    DAVIES L, BULL J, KUCKI T. Lightweight backfill materials in integral bridge construction[J]. Proceedings of the Institution of Civil Engineers: Bridge Engineering, 2014, 167(1): 3-16. doi: 10.1680/bren.10.00051
    [279]
    HUANG Fu-yun, CHENG Jun-feng, XUE Jun-qing, et al. Displacement-based simplified calculation on soil-pile interaction of PHC pipe-piles[J]. China Journal of Highway and Transport, 2019, 32(7): 77-89. (in Chinese) doi: 10.19721/j.cnki.1001-7372.2019.07.009
    [280]
    LIU H, HAN J, PARSONS R L. Mitigation of seasonal temperature change-induced problems with integral bridge abutments using EPS foam and geogrid[J]. Geotextiles and Geomembranes, 2021, 49(5): 1380-1392. doi: 10.1016/j.geotexmem.2021.05.010
    [281]
    HUMPHREY D, BLUMENTHAL M. The use of tire-derived aggregate in road construction applications[C]//WEINSTEIN N. Green Streets and Highways Conference 2010. Denver: American Society of Civil Engineers, 2010: 299-313.
    [282]
    DU Zhen-jiang. Review of the applications of shredded tire chips for the soil reinforcements[J]. Soil Engineering and Foundation, 2019, 33(3): 326-330. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-TGJC201903021.htm
    [283]
    YAO Yan, CUI Qi, ZHAO Jun, et al. New applications of waste rubber[J]. World Rubber Industry, 2009, 36(5): 40-46. (in Chinese) doi: 10.3969/j.issn.1671-8232.2009.05.009
    [284]
    ZADEHMOHAMAD M, BAZAZ J B, RIAHIPOUR R, et al. Physical modeling of the long-term behavior of integral abutment bridge backfill reinforced with tire-rubber[J]. International Journal of Geo-Engineering, 2021, 12(1): 36. doi: 10.1186/s40703-021-00163-2
    [285]
    MITOULIS S A, PALAIOCHORINOU A, GEORGIADIS I, et al. Extending the application of integral frame abutment bridges in earthquake-prone areas by using novel isolators of recycled materials[J]. Earthquake Engineering and Structural Dynamics, 2016, 45(14): 2283-2301. doi: 10.1002/eqe.2760
    [286]
    ZADEHMOHAMAD M, BOLOURI BAZAZ J. Cyclic behaviour of geocell-reinforced backfill behind integral bridge abutment[J]. International Journal of Geotechnical Engineering, 2019, 13(5): 438-450. doi: 10.1080/19386362.2017.1364882
    [287]
    ADAMS M, NICKS J, STABILE T, et al. Geosynthetic reinforced soil integrated bridge system interim implementation guide[R]. Washington DC: Federal Highway Administration, 2012.
    [288]
    XU Chao, LUO Min-min, SHEN Pan-pan, et al. Seismic performance of a whole geosynthetic reinforced soil-integrated bridge system (GRS-IBS) in shaking table test[J]. Geotextiles and Geomembranes, 2020, 48(3): 315-330. doi: 10.1016/j.geotexmem.2019.12.004
    [289]
    ARDAH A, ABU-FARSAKH M, VOYIADJIS G. Numerical parametric study of geosynthetic reinforced soil integrated bridge system (GRS-IBS)[J]. Geotextiles and Geomembranes, 2021, 49(1): 289-303. doi: 10.1016/j.geotexmem.2020.10.005
    [290]
    TALEBI M, MEEHAN C L, LESHCHINSKY D. Applied bearing pressure beneath a reinforced soil foundation used in a geosynthetic reinforced soil integrated bridge system[J]. Geotextiles and Geomembranes, 2017, 45 (6): 580-591. doi: 10.1016/j.geotexmem.2017.07.008
    [291]
    SAGHEBFAR M, ABU-FARSAKH M, ARDAH A, et al. Performance monitoring of geosynthetic reinforced soil integrated bridge system (GRS-IBS) in Louisiana[J]. Geotextiles and Geomembranes, 2017, 45(2): 34-47. doi: 10.1016/j.geotexmem.2016.11.004
    [292]
    ADAMS M, NICKS J. Design and construction guidelines for geosynthetic reinforced soil abutments and integrated bridge systems[R]. Washington DC: Federal Highway Administration, 2018.
    [293]
    LUO Min-min, XU Chao, YANG Yang, et al. Seismic performance of geosynthetic reinforced soil-integrated structure in shaking table test[J]. Journal of Tongji University (Natural Science), 2019, 47(11): 1541-1547. (in Chinese) doi: 10.11908/j.issn.0253-374x.2019.11.002
    [294]
    LUO Min-min, XU Chao, YANG Zi-fan. Geosynthetic reinforced soil-integrated bridge system and its applications[J]. China Civil Engineering Journal, 2019, 52(S1): 226-232. (in Chinese) doi: 10.15951/j.tmgcxb.2019.s1.029
    [295]
    XU Chao, LUO Min-min, REN Fei-fan, et al. Experimental study on seismic behaviour of reinforced soil flexible abutment composite structures[J]. Rock and Soil Mechanics, 2020, 41(S1): 179-186. (in Chinese) doi: 10.16285/j.rsm.2019.0658
    [296]
    HUAChuan-bin, XUE Jun-qing, BRISEGHELLA B, et al. Research on pavement roughness of jointless bridge with Z shaped approach slab[C]//LU Xin-zheng. The 27th National Conference on Structural Engineering. Xi'an: Engineering Mechanics Press, 2018: 528-535. (in Chinese)
    [297]
    CHEN Qi-ming, ABU-FARSAKH M. Mitigating the bridge end bump problem: a case study of a new approach slab system with geosynthetic reinforced soil foundation[J]. Geotextiles and Geomembranes, 2016, 44 (1): 39-50. doi: 10.1016/j.geotexmem.2015.07.001
    [298]
    FU Cui, FAN Zheng-hui, ZHUANG Yi-zhou, et al. Study on micropile under approach slab and soil interaction in jointless bridge[J]. Journal of Fuzhou University (Natural Science edition), 2017, 45(2): 179-184. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-FZDZ201702005.htm
    [299]
    BRIDGE R, GRIFFITHS S, BOWMAKER G. The concept of a seamless concrete pavement and bridge deck[C]//STEWART M G, DOCKRILL B. Australian Structural Engineering Conference 2005. Sydney: INFORMIT, 2005: 289-298.
    [300]
    ALA N M, AZIZINAMINI A. Proposed design provisions for a seamless bridge system: cases of flexible and jointed pavements[J]. Journal of Bridge Engineering, 2016, 21(2): 04015045. doi: 10.1061/(ASCE)BE.1943-5592.0000750
    [301]
    ALA N M, AZIZINAMINI A. Experimental study of seamless bridge transition system for US practice[J]. Journal of Bridge Engineering, 2016, 21(2): 04015046. doi: 10.1061/(ASCE)BE.1943-5592.0000749
    [302]
    ZHAN Xue-fang, LIU Kai-le, ZHAO Yi-bin, et al. Tensile performance of SHCC road-bridge link slabs in fully jointless bridges[J]. Advances in Civil Engineering, 2021, 2021: 6643643.
    [303]
    ZHAN Xue-fang, WANG Xian, YANG Heng-li, et al. Tensile deformation performance and application of LEM-SHCC road-bridge link slab mixed with rubber powder of fully jointless bridge[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 104-118. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JYGC202205005.htm
    [304]
    EICHWALDER B, KOLLEGGER J. Durable transition structure for long integral abutment bridges[J]. Structural Concrete, 2018, 19(4): 1092-1100. doi: 10.1002/suco.201700111
    [305]
    MAYER M, HUß M, KIM H H, et al. UHPFRC for jointless transition structures of integral bridges[C]//MIDDENDORF B, FEHLING E, WETZEL A. The 5th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials. Kassel: Kassel University Press, 2020: 117-118.
    [306]
    MAYER M, HUß M. KIM H H, et al. Übergangskonstruktionen aus UHPFRC für den integralbrückenbau[J]. Beton-Und Stahlbetonbau, 2022, 117(2): 78-89. doi: 10.1002/best.202100093
    [307]
    ZHUANG Yi-zhou, XU Liang, REN Wei-gang, et al. Research on flooding-resistant performance of integral abutment jointless bridge[J]. Journal of Fuzhou University (Natural Science Edition), 2016, 44(4): 472-479, 486. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-FZDZ201604005.htm
    [308]
    ZHOU Yu-long, HAN Qiang, CHEN Jing-yi. Prediction and application of nonlinear force-displacement capacity of bridge abutment under earthquakes action[J]. China Journal of Highway and Transport, 2016, 29(7): 96-102, 158. (in Chinese) doi: 10.3969/j.issn.1001-7372.2016.07.012
    [309]
    SIMON J, VIGH L G. Seismic fragility assessment of integral precast multi-span bridges in areas of moderate seismicity[J]. Bulletin of Earthquake Engineering, 2016, 14(11): 3125-3150. doi: 10.1007/s10518-016-9947-y
    [310]
    KOZAK D L, LAFAVE J M, FAHNESTOCK L A. Seismic modeling of integral abutment bridges in Illinois[J]. Engineering Structures, 2018, 165: 170-183. doi: 10.1016/j.engstruct.2018.02.088
    [311]
    FIORENTINO G, CENGIZ C, DE LUCA F, et al. Integral abutment bridges: investigation of seismic soil-structure interaction effects by shaking table testing[J]. Earthquake Engineering and Structural Dynamics, 2021, 50(6): 1517-1538. doi: 10.1002/eqe.3409
    [312]
    FU Cui. Behavioranalysis of jointless bridge with micro-piles supported approach slab[D]. Fuzhou: Fuzhou University, 2018. (in Chinese)
    [313]
    JIAO Chi-yu, LU Zi-ming, LONG Pei-heng, et al. Advanced researches on the influences of abutment-soil-structure interaction on the seismic response of bridges[J]. Earthquake Resistant Engineering and Retrofitting, 2016, 38(6): 1-8, 31. (in Chinese) doi: 10.16226/j.issn.1002-8412.2016.06.001
    [314]
    DHAR S, DASGUPTA K. Seismic soil structure interaction for integral abutment bridges: a review[J]. Transportation Infrastructure Geotechnology, 2019, 6(4): 249-267. doi: 10.1007/s40515-019-00081-y
    [315]
    TSINIDIS G, PAPANTOU M, MITOULIS S. Response of integral abutment bridges under a sequence of thermal loading and seismic shaking[J]. Earthquakes and Structures, 2019, 16(1): 11-28.
    [316]
    BUCKLE I G. Seismic design issues for joint-less bridges with innovative integral abutments[C]//CHEN Bao-chun. The 1st International Symposium on Jointless Bridges. Fuzhou. Fuzhou University, 2014: 166-178.
    [317]
    HUANG Fu-yun, ZHUANG Yi-zhou, FU Cui, et al. Review on the seismic performance and simplified design method of jointless bridge[J]. Earthquake Engineering and Engineering Dynamics, 2015, 35(5): 15-22. (in Chinese) doi: 10.13197/j.eeev.2015.05.15.huangfy.003
    [318]
    PENG Qian-qian. Considering the interaction among soil-the abutment bridge seismic performance analysis[D]. Handan: Hebei University of Engineering, 2014. (in Chinese)
    [319]
    HUANG Fu-yun, LI Lan, ZHANG Feng, et al. Calculation method for earth pressure behind integral abutment under reciprocating large displacement action[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 131-144. (in Chinese) doi: 10.19818/j.cnki.1671-1637.2022.05.010
    [320]
    HUANG Fu-yun, CHEN Wei, XU Pu, et al. Experimental on seismic performance of integral abutment-steel H-pile-soil system[J]. China Journal of Highway and Transport, 2020, 33(9): 180-192. (in Chinese) doi: 10.3969/j.issn.1001-7372.2020.09.018
    [321]
    SEID-KARBASI M, FERNANDO V. Numerical assessment of seismic earth pressures for integral abutment bridges[C]//MEEHAN C L, KUMAR S, PANDO M A, et al. Eighth International Conference on Case Histories in Geotechnical Engineering. Philadelphia: American Society of Civil Engineers, 2019: 40-48.
    [322]
    ZANGENEH A, SVEDHOLM C, ANDERSSON A, et al. Identification of soil-structure interaction effect in a portal frame railway bridge through full-scale dynamic testing[J]. Engineering Structures, 2018, 159: 299-309. doi: 10.1016/j.engstruct.2018.01.014
    [323]
    XU Ming, LIU Peng-fei. Response of full-height frame integral abutments subjected to seismic motions[J]. Soil Dynamics and Earthquake Engineering, 2019, 121: 356-368. doi: 10.1016/j.soildyn.2019.03.024
    [324]
    DHAR S, DASGUPTA K. Comparison of modal behaviour of integral abutment bridge with and without soil-structure interaction[M]//RAO A, RAMANJANEYULU K. Recent Advances in Structural Engineering. Berlin: Springer, 2019: 245-253.
    [325]
    FRANCHIN P, PINTO P E. Performance-based seismic design of integral abutment bridges[J]. Bulletin of Earthquake Engineering, 2014, 12(2): 939-960. doi: 10.1007/s10518-013-9552-2
    [326]
    MITOULIS S A. Challenges and opportunities for the application of integral abutment bridges in earthquake-prone areas: a review[J]. Soil Dynamics and Earthquake Engineering, 2020, 135: 106183. doi: 10.1016/j.soildyn.2020.106183
    [327]
    ERHAN S, DICLELI M. Parametric study on the effect of structural and geotechnical properties on the seismic performance of integral bridges[J]. Bulletin of Earthquake Engineering, 2017, 15(10): 4163-4191. doi: 10.1007/s10518-017-0123-9
    [328]
    DICLELI M, ERHAN S. Effect of foundation soil stiffness on the seismic performance of integral bridges[J]. Structural Engineering International, 2011, 21(2): 162-168. doi: 10.2749/101686611X12994961034255
    [329]
    ERHAN S, DICLELI M. Comparative assessment of the seismic performance of integral and conventional bridges with respect to the differences at the abutments[J]. Bulletin of Earthquake Engineering, 2015, 13(2): 653-677. doi: 10.1007/s10518-014-9635-8
    [330]
    SHI Li-feng, XU Ming. Analysis of seismic response of integral bridge abutments[J]. Rock and Soil Mechanics, 2014, 35(11): 3289-3297. (in Chinese) doi: 10.16285/j.rsm.2014.11.027
    [331]
    MOHEBBI A, RYAN K L, SANDERS D H. Seismic protection of the piers of integral bridges using sliding bearings[J]. Journal of Earthquake Engineering, 2017, 21(8): 1365-1384. doi: 10.1080/13632469.2016.1211567
    [332]
    CHOI B H, MORENO L B, LIM C S, et al. Seismic performance evaluation of a fully integral concrete bridge with end-restraining abutments[J]. Advances in Civil Engineering, 2019, 2019: 6873096.
    [333]
    NGUYEN D D, NGUYEN H C. Seismic performance evaluation of integral bridges considering soil-structure interaction[M]//DI PRISCO M, CHEN Sheng-hong, AVYAS I, et al. Recent Advances in Earthquake Engineering. Berlin: Springer, 2021: 91-102.
    [334]
    ZHAO Qiu-hong, GUO Hao-meng, DONG Shuo. Seismic responses of abutment steel piles in integralskewed bridges[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 119-130. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JYGC202205006.htm
    [335]
    ZHAO Qiu-hong, ZHANG Ji-hao, CHEN Bao-chun. Seismic analysis on skewed integral abutment bridges[J]. Earthquake Engineering and Engineering Dynamics, 2018, 38(4): 34-40. (in Chinese) doi: 10.13197/j.eeev.2018.04.34.zhaoqh.006
    [336]
    HUANG Chao-guang. Seismic response analysis of integral abutment skew beam bridges under earthquake excitation[J]. Journal of Water Resources and Architectural Engineering, 2020, 18(3): 182-188. (in Chinese) doi: 10.3969/j.issn.1672-1144.2020.03.032
    [337]
    VANDER WERFF J, SRITHARAN S. Girder load distribution for seismic design of integral bridges[J]. Journal of Bridge Engineering, 2015, 20(1): 04014055. doi: 10.1061/(ASCE)BE.1943-5592.0000641
    [338]
    YEN W P, DEKELBAB W, KHALEGHI B. Connections for integral jointless bridges in seismic regions suitable for accelerated bridge construction[J]. Transportation Research Record, 2017, 2642: 147-154. doi: 10.3141/2642-16
    [339]
    EASAZADEH FAR N, BARGHIAN M. Safety identifying of integral abutment bridges under seismic and thermal loads[J]. The Scientific World Journal, 2014, 2014: 757608.
    [340]
    NÍ CHOINE M, O'CONNOR A J, PADGETT J E. Comparison between the seismic performance of integral and jointed concrete bridges[J]. Journal of Earthquake Engineering, 2015, 19(1): 172-191. doi: 10.1080/13632469.2014.946163
    [341]
    CARISTO A, PALAIOCHORINOU A, MITOULIS S A. Numerical research on the seismic response of novel integral abutment bridge designs and comparison to the current design practice[C]//ASCE. The 1st International Conference on Natural Hazards and Infrastructure. Chania: American Society of Civil Engineers, 2016.
    [342]
    AHMED B F, DASGUPTA K. Seismic damage assessment of integral abutment bridge[M]//DUTTA S, INAN E, DWIVEDY S. Advances in Rotor Dynamics, Control, and Structural Health Monitoring. Berlin: Springer, 2020: 359-373.
    [343]
    SHAO Yi-han, XIE Ya-zhou, ROBLEE C J, et al. Seismic fragility of approach backfill differential settlement for statewide bridges in California[J]. Soil Dynamics and Earthquake Engineering, 2022, 153: 107049. doi: 10.1016/j.soildyn.2021.107049
    [344]
    MITOULIS S, ARGYROUDIS S, KOWALSKY M. Evaluation of the siffness and damping of abutments to extend direct displacement based design to the design of integral bridges[C]//PAPADRAKAKIS M, PAPADOPOULOS V, PLEVRIS V. 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Crete Island: National Technical University of Athens (NTUA), 2015, DOI: 10.7712/120115.3500.1060.
    [345]
    XUE Jun-qing, ALOISIO A, LIN Yi-biao, et al. Optimum design of piles with pre-hole filled with high-damping material: experimental tests and analytical modeling[J]. Soil Dynamics and Earthquake Engineering, 2021, 151: 106995. doi: 10.1016/j.soildyn.2021.106995
    [346]
    XUE Jun-qing, LIN Yi-bao, BRISEGHELLA B, et al. Quasi-static test on mechanical behaviors of pre-hole isolation pile-soil interaction[J]. China Journal of Highway and Transport, 2022, 35(4): 153-165. (in Chinese) doi: 10.3969/j.issn.1001-7372.2022.04.012
    [347]
    FU Rui-huan, BRISEGHELLA B, XUE Jun-qing, et al. Experimental and finite element analyses of laterally loaded RC piles with pre-hole filled by various filling material in IABs[J]. Engineering Structures, 2022, 272: 114991. doi: 10.1016/j.engstruct.2022.114991
    [348]
    XUE Jun-qing, LIN Yi-bao, FU Rui-huan, et al. Pseudo- static test on mechanic behavior of pile with pre-hole filled by foam[C]//IABSE. 2019 IABSE Congress. New York: IABSE, 2019: 2039-2043.
    [349]
    MITOULIS S A, TEGOS I A. Two new earthquake resistant integral abutments for medium to long span bridges[J]. Structural Engineering International, 2011, 21(2): 157-161. doi: 10.2749/101686611X12994961034011
    [350]
    WILSON J C. Stiffness of non-skew monolithic bridge abutments for seismic analysis[J]. Earthquake Engineering and Structural Dynamics, 1988, 16(6): 867-883. doi: 10.1002/eqe.4290160608
    [351]
    LI Huan-xing, YANG Chun-lei, ZHENG Gang, et al. Seismic performance assessment and strengthening design of shiyang river bridge in Yunnan[J]. World Bridges, 2007, 35(3): 66-68. (in Chinese) doi: 10.3969/j.issn.1671-7767.2007.03.019
    [352]
    ZHAI Hong-li, WANG Jin, WANG Cheng-ge. Seismic research on half-whole bridge without expansion joint of highway at highland earthquake region[J]. Value Engineering, 2013, 32(8): 59-62. (in Chinese) doi: 10.3969/j.issn.1006-4311.2013.08.032
    [353]
    WANG Sheng-zhi. Research on dynamic behaviors and energy dissipation capacity of micropile with predrilled oversize hole in aseismic semi-integral abutment[D]. Fuzhou: Fuzhou University, 2016. (in Chinese)
    [354]
    ZHUANG Yi-zhou, LI Zeng-feng, CHENG Jun-feng, et al. Analysis on seismic performance of semi-integral abutment jointless skew bridge[J]. Journal of Architecture and Civil Engineering, 2017, 34(3): 24-30. (in Chinese) doi: 10.3969/j.issn.1673-2049.2017.03.004
    [355]
    GUO Wei-qiang, BRISEGHELLA B, XUE Jun-qing, et al. Research on dynamic characteristics and seismic performance of jointless bridges[J]. Journal of Architecture and Civil Engineering, 2021, 38(4): 89-100. (in Chinese) doi: 10.19815/j.jace.2020.11058

Catalog

    Article Metrics

    Article views (5568) PDF downloads(405) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return